Haier Haier notebook computer boot into the BIOS method
The method of entering the Haier Haier notebook computer BIOS is to press F2 key when powering on.
How to remove the CMOS setup of Haier computer
Haier computer defaults to install a set of System Restore software, although the software is installed under Windows, but is dependent on the BIOS to run, if only the format of the disk operation is not completely remove the System Restore software.
After the restore software is run, any settings for the BIOS are saved, the computer is revoked (restored) after it is restarted, and if the operating system is installed, it reverts to the state before the operating system was installed after the computer's first reboot.
More than 90% of your problems may be caused by this restore software, we recommend that you try to deactivate or uninstall the Restore software using the following methods
After the boot Mad Press home button, appear the Haier restore the interface of the program, enter the password, the default is lowercase "haier" (without double quotes), then the menu, select "Deactivate" or "Uninstall" can be, and then restart the computer, the BIOS settings can also be saved, you can reinstall the operating system.