Hardware problem causes Win7 flagship system to crash

1, especially when the summer comes, hot weather, at this time if the accessories temperature is too high will cause panic, to do a good job of cooling;

2, in the case of small memory (less than 128M), it is best not to run the memory of more software and games or run multiple programs at the same time, this will lead to insufficient physical memory, resulting in panic;

3, today's CPU and display card because of the adoption of a new technology, so have a good overclocking performance, but overclocking is very easy to cause Win7 system instability or even panic (damage to the hardware for the time being), for the crash caused by overclocking, should be timely to reduce frequency, or restore its rated working frequency, to ensure that the computer stable work;

4. Before upgrading the motherboard or the BIOS of the card, make sure that the version number of the BIOS to be upgraded is in accordance with the model of the Board card, and strongly recommends backing up the original version, just in case;

5, there will be a large number of dust in the air, the use of a long time after the chassis will accumulate a large number of dust, it should be cleaned up in time, or seriously affect the cooling effect, and dust contact with the Board circuit will cause short circuit, resulting in panic;

6, in the replacement of Win7 system computer accessories, after installation, we must carefully check again to see whether the hardware has been inserted to prevent bad contact caused by the crash;

7, sometimes because of the conflict between the hardware caused by the Win7 system blue screen panic, then you can try to refresh the new BIOS for the board, update the driver or change the system of the device interrupt number, it is not, the replacement of hardware.