Apply to hint toner cartridge life will arrive, start still can continue to use, otherwise the manufacturer how to make money.
The following methods come from the liberal arts of Baidu:
First, HL-1208 machine Qing 0 method (that is, TN1035 powder box applicable HL series models)
1. Usually if the printer is turned on at this time, press the power button for a few seconds to turn the printer off. Press and hold the Power-on key to open the top cover when the panel two LEDs are lit at the same time. The error led should be off after the top cover is turned on and the ready to use indicator illuminated steady. Remove the cartridge unit, two LEDs are lit at the same time, then release the Power-on key.
2, install the Toner Cartridge unit and close the top cover.
3, press the Boot key two times. Make sure the error LEDs are always lit. Continue with the 4 operation.
4, perform the following operation Reset counter: For the initial toner cartridge, (experience powder box) continuously press power-on key five times. Automatic self-test after a few seconds and then the green light is back to normal can be printed. For standard toner cartridge, (changed cartridge) press the Power-on key six times continuously. Automatic self-test after a few seconds and then the green light is back to normal can be printed.
personal supplement: After finishing, my computer does not recognize the printer, the solution is to uninstall the driver and reload, install the installation steps prompted to insert the data cable and open the printer, the steps I forgot, the driver installed when prompted the correct steps, be sure to follow the prompts to operate otherwise can not be next.
Second, the DCP-1518 machine Qing 0 method (namely TN1035 powder box applicable DCP series model)
Press the menu key to find the device information, press OK key, and then the key to choose to reset the toner cartridge, press OK to reset,
There is a numeric keypad input *, no keyboard input Start button, this time the display will be eliminated,
There is a numeric keypad input 11, no numeric keypad press up or down key selection to 11, the screen appears as accepted on the OK.