Home Telecom Fibre Router set up WiFi steps

In the network technology so developed today, WiFi has basically covered every corner of the city. WiFi is convenient and flexible, and can be used without network cable, and can achieve multiple computers or mobile phone sharing purposes. However, in this process we must have a router, and also have to learn the router Wifu installation and settings. Today, many communities have telecommunications Optical Network Service Center, "fiber-optic account" when manufacturers generally send a router, and some service centers will help set up the router, but more often need to set their own. Telecommunications fibre-optic routers what are the ways to set up WiFi?

Set method One:

Step One:

Get Super Admin account password, first computer connection light cat:

1. View the gateway, open the command prompt, XP system "Start-run-enter cmd-return", Win7 users, if not found to run, you can "start-All Programs-attachment-command Prompt";

2. Enter Telnet 192.168.1.1 carriage return at the command prompt, root carriage return, admin carriage return, Shell return CD/MNT/JFFS2 (vi/mnt/jffs2/hw_ctree.xml carriage return) return, can discover the screen has no obvious change;

Continue typing grep telecomadmin hw_ctree.xml carriage return (you can find the account password in this string of English);

Type/telecomadmin carriage return (before the account changed to admin, so the input is Admin) username= "XXX". XXX is the user name, password= "XXX", that is, the password.

Attach the password to modify the technique: find the place to be modified, use the arrow keys to move the cursor to modify the place, click on the keyboard lowercase s, you can use the DELETE key or input to enter the content, modified, especially to note: must click on the keyboard ESC, exit S key Modify command, The same will be true of other changes in the future. Enter a colon plus x (: x) to save the current file and exit. Remember your account password.

Step Two:

1. Use a U disk to back up the configuration file. Open the browser, the address bar type the Gateway 192.168.1.1 login with the password you just obtained. Insert U disk into cat side USB port, backup initial configuration inside management-Device management-USB backup configuration

2. Click on the network, broadband settings, fourth, "4_internet_r_vid_1261", the four options tick, and the following will have the default setting parameters. Note the LAN ID parameter and the multicast VLAN ID parameter (or cut a picture to save). Then delete, then create a new one of the same link, select the route in the link type, the Multicast VLAN ID just noted (each region is different, must fill in what you just wrote down), the following fill in the Internet username and password.

3. After the application, you can in the network-routing settings to open the routing function, you can support the home of several computers at the same time the internet, eliminating the trouble of routing. Wi-Fi can be turned on if you need it (preferably with a WiFi password), your mobile phone, laptop, Tablet PC can be wirelessly connected to your home.

Step three: Save the settings

Click Management, Device Management, save configuration, click Save Configuration. Remember to save, or the configuration will revert to the original after the route restarts.

Set method Two:

First step: Access to the wireless router. (A network cable is required to plug into the wireless router LAN port, which is connected to the computer network port, the general router has 4 to 5 LAN ports). Input: http://192.168.0.1 or http://192.168.1.1 into the router.

Step Two: Router network configuration: Dynamic IP, static IP, Ppoe, three forms, you can choose dynamic IP form. 

Dynamic IP Settings: Click "Next", "next" on the line. The DHCP service then selects disable and disables. If your router is http://192.168.1.1 login, changing the network segment address to 192.168.x.1 X can be any value. If 192.168.2.1, you do not need to change if you are 192.168.0.1.

Step three: From the fibre-optic router's LAN port (preferably from Port 4th), pull out a network cable to the wireless router's LAN port (port 1th), not to the Internet port.

Fibre-optic router settings--common ways to connect hardware

1, telephone line->adslmodem-> computer

2, twisted pair (Ethernet cable)-> computer

3, cable TV (coaxial cable)->cablemodem-> computer

4, optical fiber-> Photoelectric Converter-> Proxy Server->pc

Adsl/vdslpppoe: A computer running a third-party dial-up software such as a Enternet300 or WinXP system with its own dialer, fill in the account and password provided by the ISP, dial before each time you go online, or your adslmodem has routing enabled, Fill in the ISP provided by the account and password, dialing the action to the modem to do;

Static IP:ISP provides you with fixed IP address, subnet mask, default gateway, DNS;

Dynamic IP: The computer's TCP/IP property is set to "Automatically obtain IP address", each time you start the computer can access the Internet;

802.1x+ static IP:ISP provides fixed IP address, special dialing software, account number and password;

802.1x+ Dynamic IP:ISP provides special dialing software, account number and password;

Web authentication: Every time before the Internet, open IE browser, first go to the ISP designated home page, fill in the user name provided by the ISP password, through the certification can be used for other online operation.