HTC lengend G6 online-MMS settings

1. in standby mode, choose menu> Settings> Wireless Control> Mobile Network Settings> Access Point name. after entering the information, press menu to "New Access Point name"
1. Name: China Mobile MMS settings
2. Access Point name: cmwap
3. Proxy: 10.0.0.172
4. Port: 80
5. Username: (empty)
6. Password: (empty)
7. SERVER: (empty)
8. mmsc: http://mmsc.monternet.com (remember to add http: // otherwise you can only receive can not send-_ ^)
9. MMS Proxy: 10.0.0.172
10. MMS port: 80
11. MMS protocol: Select WAP 2.0.
12. MCC: 460
13. MNC: 02 (some machines need to set 00, and the native Chinese version can be set to 02)
14. Authentication Type: pap
15. Access Point name type: input (MMS)
After editing, press menu and select "save"

Ii. in standby mode, choose "menu"> "Settings"> "Wireless Control"> "Mobile Network Settings"> "Access Point name ".
After entering, press menu "New Access Point name"
Internet Settings
1. Name: cmnet
2. Access Point name: cmnet
3. Proxy: (empty)
4. Port: (empty)
5. Username: (empty)
6. Password: (empty)
7. SERVER: (empty)
8. mmsc:
9. MMS Proxy:
10. MMS Port:
11. MMS protocol: Select WAP 2.0.
12. MCC: 460
13. MNC: 02 (some machines need to set 00, and the native Chinese version can be set to 02)
14. Authentication Type: None
15. Access Point name type: (null)
After editing, press menu and select "save"

3. in standby mode, choose "Settings"> "Wireless Control"> "Mobile Network Settings"> "Access Point name ".
After entering, press menu "New Access Point name"
Mobile Dream network settings (you can use Feixin settings)
1. Name: Mobile Dream network settings
2. Access Point name: cmwap
3. Proxy: 10.0.0.172
4. Port: 80
5. Username: (empty)
6. Password: (empty)
7. SERVER: (empty)
8. mmsc:
9. MMS Proxy:
10. MMS Port:
11. MMS protocol: Select WAP 2.0.
12. MCC: 460
13. MNC: 02 (some machines need to set 00, and the native Chinese version can be set to 02)
14. Authentication Type: None
15. Access Point name type: Default
After editing, press menu and select "save"

After modification, select cmnet to access the Internet without WiFi.
3. Continue to press exit and return to the "Wireless Control" Page. Check the sixth item "mobile network! (Wait a bit here) there may be no signal.
4. Finally, exit the standby interface. Press "phone" to enter the dial-up panel and enter * #4636 #*#*
1. Click "mobile phone information" to enter
2. Pull to the bottom and click the switch DNS check button in the lower left corner.
Display 0.0.0.0 allowed next to the button and return to the standby Desktop
You can also display the E flag without restarting. (TIPS: If you like it, you can restart it to display it)

After modifying the settings of MMS, you can now send and receive mms. It has been tested !! Thank you for your support.
Because I use the native Chinese version, some settings may be different from some of my friends !! Forgive me !! Thank you !!

You can use the three functions of Internet access, Apsara, and MMS sending and receiving based on the preceding settings. If you need to send emails to Apsara, You must select the third item to complete the settings, if you want to access QQ on the internet, select the first item !!