is the Apple 6 Plus signal bad? These four strokes make your signal full.

Sometimes we have problems with the bad iphone signal, the iphone signal can be a variety of reasons, in addition to the operator's problem, location and the iphone itself is more likely, below we look at 4 strokes to solve the iphone signal bad skills.

switch Flight mode, re-search the signal .

In the day-to-day use of the iphone, occasionally there will be poor phone signal, for example, in some of the location of the base station will often signal instability. At this point, users can try to switch flight mode, to try to restore the phone signal.

How to operate:

The first step is to open the flight mode first. The user can open the flight mode in the control center.

Second step, wait about 5 seconds, then close flight mode.

This helps to solve the problem of bad signal or no signal.

hand-selected operators to solve signal problems

Generally speaking, the iphone will automatically access the corresponding network according to the user's mobile card. But sometimes when the iphone is bad, there is no way to find a mobile phone network, then you can try to select the network manually.

How to operate:

The first step, in the Settings application, click to enter the "operator" option.

The second step, in the Operator Options page, turn off the "automatic" feature.

The third step, will later show the network operators, users simply according to their own mobile phone card to select the corresponding operator can. For example, China Mobile users can choose "China Mobile".

Reset the phone network to solve the signal problem

In trying the above two methods, the handset signal is still bad, the user can also try to reset the network setup function.

How to operate:

The first step, in the settings application, the "General" option page, click to go to the "restore" option.

In the next step, on the Restore Options page, click Restore Network Settings.

The user should be reminded that resetting the network settings clears the user's WiFi password.

Brush Machine Recovery system solves signal problem

The iphone may be a systemic problem when it fails to solve the iphone's bad signal. At this point, you can try the brush machine to restore the system method.

Brush Machine Tutorial

1. Brush iOS9 test version of the system must be checked "Retain User information brush machine", or the brush after the machine will not be activated.

2. Before brushing the machine needs to do the important data material backup work, the Brush machine Assistant provides the backup function

(1) After the successful connection of the equipment, click the "Backup Restore" button to enter the data backup page, the default selection of all backup options, it is necessary to note that if the machine before the device has escaped, the corresponding jailbreak application after brushing machine can not be restored.

(2) Click on the "Start Backup" button to start the backup;

(3) the backup completes;

5. Confirm that you have opened the Apple ID lock (that is, Find my iphone feature), if turned on, please close, to prevent the brush after forgetting the Apple ID password can not be activated. How to turn off: "Settings"-"ICloud"-"Find My iphone" option off;

Brush Machine Tutorial:

1. After successfully connecting the equipment, click on "One key brush machine";

2. Enter the import or download firmware page, you can automatically match the firmware version, click the "Start Brush machine" began to download the firmware, the firmware after downloading automatically into the brush machine process. If the firmware has been downloaded, you can directly "import the firmware" to start the brush machine;

3. Brush machine about 5 minutes, brush machine process, please be patient, do not disconnect equipment or other operations;

4. After brushing the machine automatically into the activation process, after activation can be installed "required application";

After brushing machine data restore:

1. After brushing the machine to enter the data restore page, select Restore files and click "Next" that is to enter the data reduction process;

2. Select the data item you want to restore;

3. Click "One key Restore" into the restore process;

4. Data Restore Completion page, click "OK" that end data restore;