A user is Lenovo notebook Win7 64-bit flagship version of the operating system, in the computer boot check found no network card equipment, resulting in the network can not connect the problem, if not found the network card is very likely to be disabled without opening, in fact, we can through the BIOS to enable the network card, For less exposure to the BIOS interface, how to set up a little rusty, the following peas hands-on teach you through the BIOS to enable the network card bar.
Lenovo notebook Win7 64-bit through the BIOS to open the NIC method/step:
1, first in the Windows7 64-bit system when the fast key disk F1 or delete key value into the BIOS panel;
2, then in the "BIOS" Panel selected "Device" in the "Network Setup" option;
3, then select "Onboard Ethermet Controller" After press ENTER, select "Enabled" option and press ENTER;
4, the final on the keyboard press the F10 key, selected "YES" system can be restarted, at this time the BIOS card switch on the display of "open" state.
Computer network card can not find a number of factors, in addition to the tutorial method to open the network card, in fact, there may be a problem with the network card, if the tutorial to open the NIC, can not solve the network problem, then it is recommended to use the Driver Life Card version to reinstall the driver.