Lenovo thinkpadt410 Boot failure error fan error How to do?

Lenovo Tinkpad t410 boot failure error fan error How to do? power-on report fan error is because the machine cooling system work is not normal, resulting in overheating CPU and other components, need to remove the radiator, add thermal silicone grease and so on. Tinkpad t410 is structurally more sophisticated than t60p, in particular, the structure of the keyboard is not the same, the process of dismantling must pay attention to the keyboard in front of two screws fixed, the back has 1 screws fixed, and the front of the two screws are hidden under two keyboard caps, very covert, we must be careful.

1, first turn over the t410, the battery first take down. Then put the screws behind them and take them down. And then according to the screw in the machine position of the pattern, so that the purpose is different position of the screws, his length is not the same, so in advance according to the location of the dismantling, such as the installed time will not be disorderly, do not know which screw is which position.

2, when the keyboard out of the time must be careful to have a chain link buckle, do not force the pull will be bad, the keyboard can be seen after the cooling device. You can see the CPU by removing 4 screws from the CPU. Apply a bit of thermal grease on the line.

3, remove the radiator, you must pay attention to these two positions of the screws do not take down, you are not to get out of the radiator, well, I hope everyone to dismantle the machine smooth, notebook structure is more compact, we have to be careful not to hard, or demolition will be broken.

Note: Keyboard small Red Hat left and right two key caps each have two screws, small red hat corresponding to the back also has a fixed keyboard screws.