Load Balancing device link load configuration

Root password default
SSH Port 10022
Acquiescence Mgmt Port IP https://192.168.1.245:9999
Default account password Admin

Configuration steps:

1. Set the interface IP address
2. Set up device routing
3. Set Snat
4. Set Up link Health check
5. Set session hold
6. Set up service pool, reference Snat, health Check, session hold
7. Add policy, reference service pool

1. Interface IP Address

2, the device management traffic routing, the source address is the external network IP, the destination address is full 0 (how many lines are configured how many routes), if the Xia Lian device is a three layer switch, add the packet back route

3, SNAT IP Group has the number of lines on the number of groups, the address of each group is the IP address of the extranet

4, Link Health Check, how many lines of the number of groups, each set for ping outside the network IP

5, set the session to maintain the destination address session hold

6, set the service pool type Select link number of lines to join the number of external lines of the gateway, port selection 0, and refer to Snat Group, Health Check, session hold

7, add the policy, add the Snat policy, the source interface is the intranet port, the service pool references the service pool created in the previous step, the rest defaults, and the policy is started after completion.

Port mappings:
1, create service pool, type Select server, fill in the server IP, port to be mapped
2, add the policy, the type is Dnat policy, the source address is 0 destination address for the external network IP, select the port, the extranet interface and reference the service pool created in the previous step

Load Balancing device link load configuration