Management after vro wireless network settings

This article introduces a lot of vro setting methods, but many people do not know that management is required after the wireless network is set up. Otherwise, your wireless network will become slower and slower.

Management of wireless networks involves a large number of network identification and Address Allocation issues. Most WAP contains general documents on installation and configuration, but not all of them mention changing the default configuration (when possible, making stronger security settings) can usually bring the best security effect. These settings include selecting the SSIDs, disabling the SSID broadcast, and enabling any type of encryption mode (the higher the intensity, the better). This will enable the wireless network to be better applied.

Device layout and Signal Management, Wireless Network Access Point (AP, or WAP, used to connect a wireless network bridge to a wired network) the layout of the antenna with the wireless network interface is the key to obtaining good results. The wireless network signal strength measurement tool (usually tied to the software and driver attached to the wireless network interface card) is used, install such tools on laptops or handheld computers to easily measure the signal strength of wireless networks) to ensure that authorized users can access and use wireless networks. These are also used to troubleshoot performance problems. NetStumbler is a free program for this job.

Troubleshooting may occur on all networks, but it is especially important to use wireless networks. When a mobile user connects a laptop to the network, the administrator needs to quickly learn to identify "blind spots, wireless Network coverage is sub-optimal or unavailable (more WAP needs to be added to solve), which requires administrators to handle typical access and access problems.

The network protocol analyzer or sniffer works with wireless network interfaces to control and measure network traffic, the characteristics of each network traffic, and identify harmful access attempts, some specialized commercial tools, such as AiroPeek, are usually used for this purpose. However, an open-source product, such as Ethereal, can also run in many wireless network interfaces, and can obtain enough information. Because of the free features of open source products, using such tools can bring about low costs.

Construct a correct wireless network connection. Based on the natural characteristics of wireless network traffic broadcast, even if the hardware is near your local firewall, when the user accesses network resources, both WAP and wireless network interfaces must be used as external devices of the firewall for access. This means that WAP needs to be used as the DMZ (isolation zone, logical, not physical), and the traffic through the firewall and wireless network before allowing access to the internal network and its resources, VPN is used to connect two wireless network users and their networks. It is very important to prevent external users from accessing your network.

The above is what we need to do to manage a wireless network. Isn't it easy?

As long as you notice the operation of the wireless network, you can make necessary adjustments at any time to create a safe and stable wireless network environment. Of course, it is also very important to select a good wireless router.