Mercury (Mercury) wireless router setup graphics and text tutorial

To reset the mercury router: Press the reset button for more than 5 seconds and release the button when the SYS indicator is flashing fast, the router will reboot, and the router will be successfully restored to the factory setting after the reboot.

First, the connection settings of the hardware device

1, establish LAN connection. Connect a router's LAN port with a network cable and a hub or switch in the LAN. You can also use a cable to connect the router directly to your computer network card. (Figure 1)

2, the establishment of wide area network connection. Connect routers and Xdsl/cablemodem or Ethernet with a network cable. (Figure 1)

3, connect the power supply. Connect the power supply and the router will start itself. (Figure 1)

Figure 1

Second, set up a network connection

1, the computer IP address settings. Specific reference to the fast wireless router settings http://www. Jb51. net/softjc/39398. Html

2, testing and connectivity to the router.

In the Windows XP environment, click Start-Run, enter the "cmd" command in the running window that appears, return or click OK to enter the interface shown in the following image.

Enter command: Ping192. 168. 1. 1, enter.

If the screen appears as:

The computer has successfully established a connection with the router.

If the screen appears as:

This indicates that the device is not yet installed, please check the following order:

A is the hardware connection correct?

The LAN status LED (1/2/3/4) for the LAN port on the device panel and the network card light on your computer must be lit.

b whether the IP address of the device is the default value of 192. 168. 1. 1?

If you are unsure whether the device is the default IP address 192. 168. 1. 1, you can follow 2. The Reset method described in section 2 restores the device to factory default settings.

C Does your computer have the correct TCP/IP settings?

If the device has an IP address of 192. 168. 1. 1, you must be 192 when you manually configure your computer's IP address. 168. 1. X (x is any integer between 2 and 254).

Third, mercury wireless router settings

Open IE Browser program, enter "http://192" in the Address bar. 168. 1. 1 ", enter the confirmation you will see the following image of the login interface, in the Login dialog box to lose the username and password (factory settings by default are" Admin "), click" OK "button.