Motherboard failure causes PE system blue screen how to do

Into the system blue screen, heavy installation system is also this phenomenon, into the PE will be computer blue screen, into the PE is a screen, we often do memory or graphics card problems, but replace the memory and video card, into the PE system or blue screen. If it is a motherboard problem often this kind of problem is more difficult to check, because it is often related to hardware problems resulting in a blue screen driver.

After inspection found that the motherboard is repaired, visually north-south bridge has been changed, motherboard blue screen. Hard drive conversion chip HDD has also been changed, and BIOS data can not be saved. Even if the north-south bridge has been changed should be no problem, just have a piece of the same model of the motherboard, the hard disk conversion chip HDD replaced to try the next, really lucky, into the PE system incredibly not blue screen, reinstall the system, everything is normal, maintenance motherboard blue-screen has not met so smooth.

Motherboard failure led to enter the PE system blue screen, the general Board has the following problems:

1. Usually the problem of North Bridge led to the motherboard blue screen, this fault sometimes by hand pressure on the North Bridge can be known.

2. Insufficient memory supply causes the motherboard blue screen.

This is the first time that I have encountered HDD conversion chips.