Move the hard drive to the computer do not show what to do

Move the hard drive to the computer do not show what to do

In addition to the method of reloading the USB driver, when the problem arises, we should check it in the following way. First of all, the problem of the hard drive is not recognized, in addition to the driver problems, there may be a lack of power to the USB port caused.

Therefore, when there is a USB hard drive indicator light, and can not be properly recognized when the hard disk is recommended to plug into the USB port behind the host, because the general USB front-end Port power supply, in order to ensure that the hard disk can be sufficient power, it should be plugged into the host back-end USB interface.

A second check point, the hard disk itself is a problem, if a computer device does not recognize the hard drive, then you should plug the hard disk into other computers, if the other computer (recommended to use a different operating system) is also not normal recognition, then do not rule out the failure of the hard disk itself is possible.

4 If you really confirm that the hard disk itself is faulty, then you should consider the hard drive back to the factory repair, if the hard drive has expired, or the hard drive has been a lot of bad, so the maintenance is not meaningful, after all, if the hardware itself is the problem, then it is recommended to buy another hard disk.