Network Load Balancing configuration is completed in 10 steps

The network load balancing configuration is completed in ten steps. We will test the virtual machine to illustrate this configuration process. www.2cto.com 1. make sure that the operating systems of the three servers are the same, and the IP address is correctly set. It is recommended that the IP address be in the same network segment and Ping between servers is correct. Assume that the IP addresses of the three servers are 1 ). 192.168.0.253 2 ). 192.168.0.254 3 ). 192.168.0.255 mask: 255.255.255.0 2. configure the network cards of the three servers to ensure that "network load balancing" is selected 3. choose system start> Administrative Tools> Network Server Load balancer manager, open the Server Load balancer configuration program, and create a cluster. 4. Cluster parameter configuration: virtual IP address, subnet mask, and virtual host name. The virtual IP address (virtual host name) is the address for the client to access. It automatically routes client requests and accesses to each server based on the network load, reducing the pressure on a single server. The configured virtual IP address is 192.168.0.1 and the virtual host name is test.domain.com. The subnet mask is consistent with that of the server. 5. in this step, you can accept the default value based on the IP address above and click Next.
6. Port rules, click Next. 7. Connect to the local IP address, select one of the network adapters (bound to Server Load balancer) of the connected host, and click Next. 8. configure host parameters. priority, dedicated IP configuration. 9. network Load Balancing management. 10. the other two servers follow this step to connect to the local IP address in step 3.