New think tank for Wireless Networks

Wireless network technology has become the focus of everyone. How should we set wireless networks? Here is a detailed introduction.

1. open "network connection" open "network connection", click "start", point to "Settings", double-click "Control Panel", and click "network and Internet connections ", click "network connection ").

2. Right-click "wireless network connection" and click "properties ".

3. On the "wireless network" tab, perform any of the following operations:

(1) To disable automatic wireless network configuration, clear the "configure my wireless network settings in Windows" check box.

(2) to enable automatic wireless network configuration, select the "configure my wireless network settings in Windows" check box. This box is selected by default.

4. to connect to an existing wireless network, perform the following operations:

(1) Access Point basics)

To connect to the existing Access Point Base) network, click the network name under "available network" and then click "Configure ".

In "Wireless Network Properties", specify the wireless network key (WEP) settings. Select the "automatically provide key for me" check box. If you are not sure whether you need a network key or which network key to enter, contact your network administrator or the manufacturer of the wireless network adapter. Note that if the network does not broadcast its network name, it will not appear under "available network. To connect to a network that you know is available but does not appear under "available network"), click "add" under "preferred network ". Under "Wireless Network Properties", specify the Network Name Service Set Identifier. If necessary, specify the wireless network key settings.

5. to configure a new wireless network connection, click "add" and then perform the following operations:

(1) Specify the network name under "Wireless Network Properties". If necessary, specify the wireless network key settings.

(2) If the network connection being configured is to connect to the computer, select "this is the computer-to-computer Special) network. Therefore, do not use the Wireless Access Point check box.

6. to change the order of connection attempts to access the preferred network, under "preferred network", click the wireless network to be moved to the new location in the list, and then click "Move Up" or "Move Down ".

7. To change the wireless network connection settings listed in a "preferred network", click the wireless network for which you want to change the settings, click "properties", and then change the settings as needed.

8. to delete a wireless network from the preferred network list, click the wireless network to be deleted under "preferred network", and then click "delete ".

9. to update the list of available networks on your computer, click "refresh ".

10. To automatically connect to an available network that does not appear in the "preferred network" list, click "advanced" and select the "automatically connect to a non-preferred network" check box.

Note the following points in Configuration:

1. When you enable automatic wireless network configuration, you can connect to an existing wireless network, change the wireless network connection settings, configure new wireless network connections, and specify the preferred wireless network. When the new network is available, you will receive a notification. After you select a wireless network, the wireless network adapter is automatically configured to match the network settings and will try to connect to the network.

2. to configure the settings on the "wireless network" tab, you must log on as an administrator and use a wireless network adapter that supports the "Wireless Zero Configuration" service. If you are unsure whether the wireless network adapter supports the "Wireless Zero Configuration" service, contact your network administrator or the wireless network adapter manufacturer.

3. If you are using a third-party wireless network software, clear the "configure my wireless network settings in Windows" check box.

4. If you cannot connect to an existing wireless network and the name of the network you want to connect to appears in the "preferred network" list, click the preferred network name and then click "properties ". In "Wireless Network Properties", check the settings and make sure they are correct. If you are not sure whether the settings are correct, contact your network administrator or the wireless network adapter manufacturer.

5. if the "preferred network" list contains both the Access Point Base) and the computer to the computer, you cannot move the computer to the computer network in the list to a location higher than the Access Point Network.