Openwrt Flash Space-shortage solution

Recently there are users in the installation of software to find that flash space is not enough:

A temporary solution is to use this program in RAM. Because

1. After the router to change the RAM has 64mb,flash generally have 16mb,ram space is relatively large. /tmp is mounted in RAM.

2.OPKG packages are available for decompression.

The following are the use procedures:

The first step is to download the package in/tmp

[Email protected]:/tmp# opkg Download tcpdump

Then unzip:

Next unzip the data.tar.gz

The final execution of the tcpdump is possible.

Of course, if you have enough space, you can install it directly. In fact, if you mount the USB stick, you can directly inside the USB stick

Unzip so that there is no RAM space involved.

Here's a bit of a hassle, by modifying the opkg configuration file to install the software elsewhere (including RAM)

Http://jingyan.baidu.com/article/20095761bae253cb0721b41a.html

Openwrt Flash Space-shortage solution