Raspberry Pi led+ buzzer + sound sensor + IR module combination to create Voice/IR control LEDs

Source: Internet
Author: User

Yesterday made the control led, played the first, the rest of the feeling is very simple, here record

Just a couple of photos.

Play the honey module only to find the law, generally this module, there will be three pins, VCC (3.3V or 5V power supply output PIN), GNC (for Gpio pin of GNC), out/(I/O) (corresponding to the gpio number of pins), if it is necessary to send information to the Raspberry Pi, This module identifies the out, such as the sound sensor used here and the human infrared sensor, both of which need to send to the Raspberry Pi detection information, if you do not need to send a message to the Raspberry Pi, then identify the I/O, such as I this beep module, which I found with these three sensors, may not be correct

An illustration of a gpio pin that was looked up from the Internet:

Coated on the left side of the bread plate is a module, is the Raspberry Pi Independent power supply module, figuring out how to pick up when the power supply port has a problem, USB is the power supply mouth, mom eggs, general chargers are from the USB port output to micro port, I am powered by the mobile power, from the mobile power of the USB is micro-port, Can not connect, need a male-to-male USB cable, there is no way to buy a data cable alone, the module is connected to the same way as other modules, connect the power of the USB port, the above pin has 3.3V, 5V, GND, it is clear, said above, the general module requires VCC and GND, Gpio above these two quantities are limited, you can receive this independent power supply module, out pin normal to the Raspberry Pi Gpio pin, but also to prevent direct burn out Raspberry Pi, and increase the interface, easy to use!

1 #Coding=utf82 ImportRpi.gpio as GPIO3 Import Time4 5 Gpio.setmode (GPIO). BCM)6 gpio.setwarnings (False)7Gpio.setup (GPIO). Out)#LED8Gpio.setup (17,gpio. Out)#Buzzer Module9 #Gpio.setup (5, GPIO. In,pull_up_down=gpio. PUD_UP) #声音传感器TenGpio.setup (23,gpio. IN)#Infrared Sensor One  A  whileTrue: -     #if Gpio.input (5) = = 0: #声音 -     ifGpio.input (23) = =True: the         Print('comming ....') -Gpio.output (18, True) -Gpio.output (17, GPIO. High) -Time.sleep (1) +Gpio.output (18, False) -Gpio.output (17, GPIO. Low) +Time.sleep (1)

Here LED is the use of the PIN number 18, beep 17, Sound 5, infrared 23, is to do the function is to detect someone on the bright LED lights and buzzer, with no voice control, so I gave comments, if you want to voice, the infrared code comments, open the sound that two lines of code can be

Today's the day. 4-digit co-yin digital tube and ultrasonic ranging

Raspberry Pi led+ buzzer + sound sensor + IR module combination to create Voice/IR control LEDs

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.