Raspberry Pi No-screen installation Ubuntu System headless installation network cable with no monitor

The person who can see this blog note that the attempt failed, will find that the memory card after the flash into Ubuntu, unable to operate the Raspberry Pi via ssh. It is because the official Ubuntu system needs to set something for the first time, similar to the initial startup of Windows, if not set up, even the operation account is not (root), so even SSH can not use the eggs. So you need to choose a non-official, self-operating account, do not need to set up a direct boot system.

Recommend one:

Https://github.com/chainsx/ubuntu64-rpi

Look inside the instructions to know.

1. Download the image from his Baidu Web disk and install it. Open the Raspberry Pi.

2. If using a network cable with Raspberry Pi, that makes the computer and the Raspberry Pi in the same LAN, you can use the network cable to the Raspberry Pi computer network, you can also put the Raspberry Pi network router, computer also even routers. Then check the IP,

2-1. If the serial port is connected, it is more convenient to enter SSH directly.

If you do not understand the operation of 2, want to look at the detailed steps here, in another blog:

3. After connecting the Raspberry Pi to the WiFi, the installation method has a tutorial. It should be noted that if the WiFi signal is above 10 channels, it is likely not recognized, then the router's channel to tune not more than 10.

4. To install the Remote Desktop, then follow the steps inside to install the system desktop, and then install a XRDP Remote Tools. Steps:

sudo apt-get Install Tightvncserver

sudo apt-get Install XRDP

Raspberry Pi No-screen installation Ubuntu System headless installation network cable with no monitor