about Ricoh Priport DX 2432 C Printing use procedure Instructions
1, lower pressure into the paper plate adjustment lever, put down the paper plate.
2, release the paper plate on the side guide plate locking rod, adjust the side guide plate to match the size of the paper.
3, the paper (a4,8k) loaded into the paper tray.
4, will feed side guide plate and paper (a4,8k) Lightly contact, the lock lever to move back to the original position. Pull the paper plate adjustment lever up and move it into the feed position.
5, adjust the paper output side guide plate (board with different paper size marks) and paper size matching.
6. After connecting the power supply, turn on the main switch to make sure the machine is running normally before standard printing.
7, the original face downward into the draft device. Adjust the manuscript side Guide board to match the original size.
8. Press the PLATE key on the Operation panel.
9, according to the operation panel on the test printing key, printed out after checking the image concentration and image position on the printed piece, whether it is their own needs of the printed pieces.
10, according to the operator panel on the number of keys to enter the required number of printing.
11, press the Operation panel on the Printing Start button, for printing.
Precautions:
1. Before the paper is loaded, please flatten the curly paper.
2. The Feed tray must be aligned with the feed position before starting printing. Otherwise, the paper jam may be caused.
3. Only one manuscript can be placed at a time.
4. The maximum number of primary printing can be entered into 9999. To change the number you have entered, press clear the Stop key, and then enter the new number.
5. After the printing is finished, the printing quantity will be the default value of the next printing quantity.