RIP Protocol Basic Configuration

1. Purpose of the experiment

Through this experiment can grasp:

(1) Start the RIPV1 routing process on the router

(2) Enable the interface participating in the routing protocol, and advertise the network

(3) Understanding the meaning of the routing table

(4) View and debug RIPV1 routing protocol related Information

2. Experimental topology

3. Experimental steps

(1) Step 1: Configure the Router R1

R1 (config) # router RIP//start RIP process

R1 (config-router) # version 1//configuration RIP version 1

R1 (config-router) # network 192.168.1.0//advertising Networks

R1 (config-router) # network 172.16.1.0

(2) Step 2: Configure the Router R2

R2 (config) # router RIP

R2 (config-router) # version 1

R2 (config-router) # network 192.168.1.0

R2 (config-router) # network 10.0.0.0

The IP address of the router should be configured first.

RIP Protocol Basic Configuration