1. New VLAN
Hs-e2860-a (config) # VLAN 220
Hs-e2860-a (Config-vlan) # show VLAN
Create VLAN:
0001,0201,0202,0203,0204,0205,0206,0207,0208,0209,0210,0211,0212,0213,0215
0216,0217,0218,0219,0220
Active VLAN:
0001,0201,0202,0203,0204,0205,0206,0207,0208,0209,0210,0211,0212,0213,0215
0216,0217,0218,0219
Hs-e2860-a (Config-vlan) #exit
2. Add Ethernet interface to VLAN220
Hs-e2860-a (config) # interface ETHERNET0/2
Hs-e2860-a (CONFIG-IF-ETH0/2) # Switchmode trunk VLAN 220
Hs-e2860-a (CONFIG-IF-ETH0/2) # exit
Hs-e2860-a (config) #show VLAN
Create VLAN:
0001,0201,0202,0203,0204,0205,0206,0207,0208,0209,0210,0211,0212,0213,0215
0216,0217,0218,0219,0220
Active VLAN:
0001,0201,0202,0203,0204,0205,0206,0207,0208,0209,0210,0211,0212,0213,0215
0216,0217,0218,0219,220
3. Configure vlan220 IP segment
Hs-e2860-a (config) # interface vlan220
Hs-e2860-a (config-if-vla220) # IP address 10.122.190.254/27
Error: Please bind domain and configure IP address of interface first
Hs-e2860-a (config-if-vla220) # Zone office//configure IP to bind domain first
Hs-e2860-a (config-if-vla220) # IP address 10.122.190.254/27
4, Configuration Change VLAN220 Management Service (Manager server)
Hs-e2860-a (config-if-vla220) #manage ssh
Hs-e2860-a (config-if-vla220) #manage Ping
Hs-e2860-a (config-if-vla220) #manage telnet
Hs-e2860-a (config-if-vla220) #save//Save Configuration
5. Check vlan220 configuration
Hs-e2860-a (config-if-vla220) # show Interface vlan220
Interface vlan220
Description: Shek Wu Shan Canteen
Physical up Admin up
Link up Protocol up
Interface id:41
IP address:10.122.190.254
IP Address mask:255.255.255.224
MAC address:001c.54a4.a537
IP mtu:1500
ARP learn:enable
ARP disable-dynamic-entry:disable
ARP timeout:1200
QoS Input Profile:1st-level--
2nd-level--
QoS Output Profile:1st-level--
2nd-level--
Downstream bandwidth is 1000000000
Upstream bandwidth is 1000000000
Bind to Zone Office
Belong to Vsys Root
Auth-arp Disable
Dns Proxy Disable
Proximity Detect off
Proximity Route Disable
Manage Service:ssh; TELNET; PING;
Secondary IP address0:0.0.0.0 mask:0.0.0.0
Secondary IP address1:0.0.0.0 mask:0.0.0.0
Secondary IP address2:0.0.0.0 mask:0.0.0.0
Secondary IP address3:0.0.0.0 mask:0.0.0.0
Secondary IP address4:0.0.0.0 mask:0.0.0.0
Secondary IP address5:0.0.0.0 mask:0.0.0.0
Rock Firewall CLI Create VLAN
