Router settings (1)

Networks are no longer an unfamiliar term for computer enthusiasts. The emergence of networks enables fast and convenient data exchange between multiple computers. Currently, networks can be divided into wired networks and wireless networks, the fundamental difference between the two lies in that a wired network is connected to a vswitch through a network card or network cable, while a wireless network is connected to a vswitch through a wireless network card, and each has its own characteristics, A wired network is connected to a vswitch through a network cable. The advantage is that the transmission speed is fast and the anti-interference capability is strong. The disadvantage is that the connection is troublesome and requires prior wiring. A wireless network is connected to a vswitch through wireless connection, the advantage is that it is easy to install and requires no prior wiring. The disadvantage is that the transmission speed is slow and the anti-interference capability is poor. Due to the convenience of wireless network installation, many netizens now prefer wireless networks. Especially for some space that cannot be cabled)

Recently, many netizens have asked questions about wireless network settings, and repeated replies are difficult to avoid. Therefore, we will describe the wireless network setting process so that users who are new to wireless networks can make a reference.

The establishment of a wireless LAN requires a wireless network card and a vswitch for the Wireless AP). If you want to access the Internet, you need to use the wireless router. This article takes the home wireless network as an example, use a wireless Nic and a wireless router.

TP-LINK WR541G 54M Wireless router and DELL 630M notebook, comes with Intel (R) PRO/Wireless 2200BG Network Connection 54M Wireless Network card.

1. vro settings

The current router settings are mostly set through the WEB. Because the router may not be able to use the wireless function before the correct settings are made, we connect to the router through the network cable; first, enter the default IP address of WR541G in the address bar of the browser, 192.168.1.1. The default IP addresses of the vro may be different. Therefore, you can find the default IP addresses in the vro or instructions. Here, you need to note: when setting a router through the WEB, the IP address of the computer connected to the router must be set to the same gateway as the router; if the router IP address of the mouse is 192.168.1.1, you can set the IP address of the computer to 192.168.1.2 --- 192.168.1.255.

You can set the IP address of a computer as follows:

When the NIC Driver is correctly installed on the computer, select Control Panel> network connection> local connection, as shown in figure

 

Select Internet protocol TCP/IP), click Properties -- select to use the following IP address; IP address input: 192.168.1.2 --- any address between 192.168.1.255, enter 192.168.1.2 here, subnet mask input 255.255.0, enter 192.168.1.1 as the IP address of the router in the default gateway. For example

 

Enter the IP address of the vro in the address bar of the browser and set 192.168.1.1 to enter the WEB configuration interface of the vro. Generally, the router requires the administrator password when entering the WEB Settings interface. For the first time, enter the original password as instructed.