In many restricted network hardware environments, we need bridging routers to implement wired or wireless network usage requirements. Take Windows 7 as an example to explain the solution.
1, first check whether the primary and secondary routers IP address conflict (here to 192.168.1.1 as an example) will cause the Internet can not be normal. The IP address in the LAN settings is overwritten by the IP address interval set in the DHCP server when we bridge the router.
2, check the secondary router DHCP server to open the DHCP service, DHCP if it is turned on, the computer may get to the wrong gateway address, resulting in the Internet, you need to shut down the secondary router DHCP server.
3, Computer connection column router, check whether the main router to open the Internet control limit corresponding to the computer network, suggest replacement rules or temporarily do not open the Internet control. As shown in the picture, remove the open and save.
4, the main router set IP and MAC address binding to prevent ARP spoofing, check the IP and the corresponding Mac is wrong, try to turn off the ARP binding Internet.
5, if the previous approach has not solved the problem, a single check whether the router can work properly, to confirm that there is no damage, or to change the order of the main and secondary routers to try the computer to connect the router's wireless communication mechanism of compatibility caused by the test can be used normally. Can record the main, deputy router product model and hardware version inquiries or contact customer service to obtain professional technical support.
tp-link:400-8863-400 Mercury Mercury: 400-8810-500 Tenda Tengda: 400-6622-666