Samsung note (I9300) recovery card brush machine graphic tutorial

Flash brushMandatory:

In terms of differences between version 9300, you can use the I9308 and I939 I9300 ROM to brush the I9300 ROM.

Before flashing, make sure to back up EFS to prevent the baseband from being unknown. Of course, you can also back up the EFS after refreshing it. The probability of the baseband being unknown is very small.

There is a risk of flash brush, please be sure to make sure your mobile phone power is above 15% the best, please do not perform any operation during the flash brush process, so as to avoid changing bricks.

Before you click it, be sure to identify whether your mobile phone is 9300 or 9308/I939. (too many people have mixed up and then become bricks)

Tools/raw materials

1. Download odin flash machine tool Baidu search

2. Download the Samsung driver

 
3. Third-party recovery File: http://pan.baidu.com/s/1pJ34JhT

4. Brush ROM package: http://m-samsung-i9300.liqucn.com/rj/c/368/


2. Install the mobile phone driver on the PC. (if this step is omitted, download the Samsung driver)
Open the driver installation package (SAMSUNG_USB_Driver_for_Mobile_Phones), and connect to your mobile phone to automatically install the driver.


3. Click third-party Recovery (skip this step if you have already logged in)

1. When the mobile phone is in the flash mode, press the volume key + HOME + power key when the screen is turned off. Then press the volume button when the screen is selected.
As shown in the following figure:





2. Run the flash machine tool Odin3 3.06 and click the third-party Recovery.
Select Auto Reboot, F, and Reset Time;
Click "PDA" and select "cf-root-sgs3-v6.4.tar" from the tool package;
After confirming that the phone connection is successful, click Start. Wait until the connection is complete. The following figure shows that the flash is successful and the system restarts automatically.



4. Brush the ROM
1. Copy and download the ROM to the root directory of the built-in SD card of the mobile phone (directly copy the ROM without any pressure );
2. When the mobile phone enters the recovery mode, press and hold the volume up key + HOME + power key;
3. Clear the phone data and execute the command on the phone (select the volume key and press the power key to confirm );
Select wipe data/factory reset -- Yes -- delete all user data.
Select wipe cache partition -- Yes-Wipe Cache.



4. Click ROM and execute the command on your phone (select the volume key and press the power key to confirm ).
Select install zip from sdcard.
Select choose zip from internal sdcard.
Select xxxxxxx_xxxxxxx.zip)
Select Yes-install xxxxx_xxxxx.
Then click Back and run reboot system now.
Wait until the restart is completed.