Set wireless network card to wifi

1. First, open the wireless connection property settings, switch to the Wireless Configuration tab, and click "add ".

2. Set the network name and a name you like. This name will be provided for searching and connecting other PCs or mobile phones. To avoid unnecessary troubles during the first connection, we recommend that you disable data encryption and remember to select the "special" connection mode above. After setting, click "OK ".

3. A prompt is displayed for risks of unencrypted network connections. The reason is not described again. Click "continue ".

4. next, set windows connection sharing. Make sure that you are using the network card to access the Internet, open the network card Properties window, and set in the Advanced Tab. After confirming, at this time, the IP address of "wireless network connection" will be set to 192.168.0.1. Even if it is the gateway of a router, other devices connected will be able to use this IP address as a gateway to access the Internet.

5. Open "available wireless network connection" and find that the added CBM-NB network has been seen. Note that it is a little different from the usual vro icon. Select and click the "Connect" button below.

6. turn on other WiFi devices, including laptops, mobile phones, and other devices. Unfortunately, the PSP cannot find the network. Here I use smartphone for demonstration, go to settings-> connection-> WiFi settings-> WiFi, open WiFi, find the CBM-NB access point, and connect to it soon.