SketchUp drawing software How to draw 3D small house?

Through a half-day study found that SketchUp really is a very good software, easy to use, a learning will be. For non-professional designers who don't use 3D drawing tools, SketchUp is a good choice if you want to draw 3D graphics. For a professional designer, try this software and you'll love it.

For example, I would like to draw a 3D of small house graphics, as shown in the following figure, how to operate it?

1, about SketchUp download installation here is not much to say, do not know can see me another article "The simplest 3D drawing tools, a learning will be".

First of all, through the ' rectangle ' tool to draw a rectangle, after drawing according to the size of small house requirements, keyboard input "5000,4000", return, that is, to draw a length of 5 meters, 4 meters wide base of the small house. (Because the following do eaves when the two sides of the wall to push each 200mm, will become a requirement of 3.6 meters)

2, through the ' push and pull ' tool, pull out the figure below the cuboid, enter 4000, indicating 4 meters high.

3, through the ' line ' tool, the following figure shows the connection between the midpoint of the draw a straight line.

4, select this line, through the ' move ' tool pull out the roof shape, enter 1500.

5, the small house has eaves, so need to use ' push-pull ' tool to push the roof pull out of the eaves.

6, through the ' line ' tool, along the two eaves to draw the following figure the intersection of two rays.

7, after the completion of the drawing, through the ' selection ' tool select useless short line after the delete key, draw the corner of the roof.

8, through the ' Surround Observation ' tool to rotate to the other side, the same way to draw the other roof angle.

9, through the ' line ' tool to connect two roof angle.

10, select the useless two line segment, delete it, so that the style of the roof basically built well.

11, set the eaves, through the ' push-pull ' tool, the two sides of the wall to push the 200mm.

12, hold down the CTRL key at the same time ' select ' The eaves of the two line, through the ' offset ' tool down to draw the following figure shown in the graphic.

13, through the ' push pull ' tool to pull out 200mm eaves. The same way, pull out the eaves on the other side.

14, the next production of small house door, the bottom line is divided into three equal parts, that is, the middle line length of 1200mm, as the width of the door.

Specific actions: Right-click the line segment, select the ' Split ' command, the keyboard input 3 after return. You can see the two endpoints that divide the segments into three parts.

15, through the two endpoints using the ' line ' tool to draw up a 2-meter long door frame, connect the other end of the two-line point.

16, using push pull tool to push pull 400mm, as wall thickness.

17, through the ' Straight ' tool and ' round ' tool, draw the shape of the wooden door.

18. Use the ' Rectangle ' tool and ' push-pull ' tool to make the window style.

19, through the ' Select ' Tool and ' offset ' tool, draw the window frame shape.

20, the location of the selected glass, deleted by the DELETE key.

21, finally through the ' material ' tool for all the surface set material.

22, set the material after the request for small house dimensioning.