Possible: Setup could not create a new system partition
After this error occurs,
1. Try plugging the SSD into the first hard drive port of the hard drive, then unplug the USB flash drive when installing the system and click Install.
2. You can try to install the system directly under PE.
If none of the two methods are available, use the following method.
1. Set the BIOS boot mode to legacy or Legacy+uefi.
2. Remove the other hard drives except the SSD, in order to make the SSD the main boot disk and the default C drive (you can actually use the hard disk partition tool to do the processing configuration, but more cumbersome).
3. Enter the PE system, format the SSD as NTFS, the default drive letter is the C drive, is successful, if there is only one SSD, it should be C drive.
4. Open the partition tool, and if you are prompted to "no active partition, cannot be used as Startup disk" then correct and save.
Then the steps are the common steps on the network.
5. Copy the three files (clips) "Boot, sources, bootmgr" in the WIN7 system to the C packing directory.
6.PE Open the CDM run "C:\boot\bootsect.exe/nt60 C:" Carriage return (command, "/nt60" before and after there are spaces, you need to note) (here is also the reason for pulling other disks, because the default is C, if the start of the other disk to occupy, it is not good), A success prompt will appear.
7. Restart the computer and the system starts to perform the installation.
8. After the installation is complete, click "Start"-"Run" in the system and enter the command: msconfig. Bring up the System configuration interface and select Boot in the System Configuration screen to remove unwanted startup items.
9. You can delete the Sources folder under the C drive, but do not delete the boot folder and the Bootmgr file.
System boot folders that do not have a hidden 100MB partition are on the system installation disk. The boot file with the hidden partition is in the hidden partition.
Bootmgr file is a system boot file and cannot be deleted.
10. Then it's ready.
SSD installation win7 system problem.