The length is +-0.2, and the width is +-0.1 (mm)
The size of model A is 3.2x1.6x1.6.
Name: A (3216)
Size of type B
3.5x2.8x1.9 commonly known as: B (3528)
C-type size 6.0X3.2x2.6 Standard
C (6032)
D
Shape size 7.3x4.3X2.9 commonly known as: D (7343)
Thickness: 2.9 inch
E-type size 7.3x4.3X4.1 Standard
E (7343) thickness 4.1 inch
V type size 7.3x6.1x3.45 Standard
Value: V (7361)
J (1608)
P (2012) is 0805
SMD ta Capacitor
Brief Introduction
Slab
As a type of electrolytic capacitor. It is widely used in various electronic products, especially some high-density assembly products with small internal space, such as mobile phones and portable printers.
The TA capacitor is made of metal Ta as the anode material. It can be divided into two types: foil and Ta powder. In the sintered ta capacitor of Ta powder, due to different working electrolyte, it is divided into solid
Electrolyte ta capacitor (solid tantalum) and non-Solid Electrolyte ta capacitor.
Among them, the amount of solid-state electrolytic capacitor is the largest. Due to the use of metallic TA as the medium, you do not need to use the electrolyte like the ordinary electrolytic capacitor. In addition, the TA capacitor does not need to use an aluminum plating film as the ordinary electrolytic capacitor.
Capacitor paper is fired, so there is almost no inductance, but it also limits its capacity. Zhongshan Aidi capacitor Metallic Film Capacitor
Taj series SMD ta capacitor is a TA electrolytic capacitor produced by avx.
The most common model in the electronic market.
Solid ta Capacitor
Features
Advantages:
Small Size
Due to the use of fine particles of the TA capacitor, and the dielectric constant ε of the TA oxide film is higher than the dielectric constant of the aluminum oxide film, the TA capacitor has a large capacity per unit volume.
Wide temperature range and high resistance
Wen
Because there is no electrolyte inside the TA capacitor, it is suitable for working at high temperatures. Generally, TA electrolytic capacitors can be at-50 ℃ ~ It works normally at a temperature of 100 ℃. Although aluminum electrolysis can also work in this range, its electrical properties
It is far inferior to the TA capacitor.
Long service life, high insulation resistance, low leakage rate, Small Ta capacitor, TA oxide film medium not only corrosion resistance, but also long-term operation can maintain good performance
Small capacity Error
And so on
Low series resistance (ESR), good high-frequency performance
Disadvantages:
Low Voltage Resistance
Low Current
High Price
SMD ta capacitor package
Size Package Size: mm (INCHES)
Avx
Conventional series (Taj) SMD ta capacitor: capacity and rated voltage (letter indicating package size)
Electric Capacity |
DC rated voltage (VR) at 85 °C) |
μF |
Code |
2.5 V (E) |
4 V (G) |
6.3 V (j) |
10 V () |
16 V (C) |
20 V (d) |
25 V (E) |
35 V (V) |
50 V (t) |
0.10 0.15 0.22 |
104 154 224 |
|
|
|
|
|
|
|
A A A |
A A/B A/B |
0.33 0.47 0.68 |
334 474 684 |
|
|
|
|
|
|
A A |
A A/B A/B |
B B/c B/c |
1.0 1.5 2.2 |
105 155 225 |
|
|
|
|
A |
A A A/B |
A A/B A/B |
A/B A/B/C A/B/C |
B/c C/d C/d |
3.3 4.7 6.8 |
335 475 685 |
|
|
A |
A A |
A/B A/B A/B |
A/B A/B A/B/C |
A/B B B/c |
B/c B/c/d C/d |
C/d D D |
10 15 22 |
106 156 226 |
|
|
A A A |
A A/B A/B |
A/B/C A/B/C B/c/d |
B/c B/c B/c/d |
C/d C/d C/d |
C/D/E C/d D/E |
D/E E V |
33 47 68 |
336 476 686 |
A A |
A A B |
A A/B/C B/c |
A/B/C B/c B/c |
B/c/d C/d C/d |
C/d C/D/E D/E |
D/E D/E E/V |
D/E/V E/V V |
|
100 150 220 |
107 157 227 |
B B B/d |
B B/c B/c/d |
B/c C/d C/D/E |
C/d C/D/E D/E |
D/E D/E/V E/V |
D/E/V E/V |
V |
|
|
330 470 680 |
337 470 680 |
D C/d D/E |
C/d D/E D/E |
D/E D/E/V E/V |
D/E/V E/V |
|
|
|
|
|
1000 1500 2200 |
108 158 228 |
D/E D/E/V V |
D/E/V E/V |
V |
Avx patch ta capacitor logo
Year Year |
Year code Year code |
2000 |
M |
2001 |
N |
2002 |
P |
2003 |
R |
2004 |
S |
2005 |
T |
2006 |
U |
2007 |
Y |
|
Zhongshan Aidi
Capacitor
Encapsulation size: millimeters (INCHES) |
|
Code |
EIA Code |
L ± 0. 20 (0.008) |
W + 0.20 (0.008) -0.10 (0.004) |
H + 0.20 (0.008) -0.10 (0.004) |
W1 ± 0. 20 (0.008) |
A plus 0.30 (0.012) -0.20 (0.008) |
S Min. |
A |
3216-18 |
3.20 (0.126) |
1.60 (0.063) |
1.60 (0.063) |
1.20 (0.047) |
0.80 (0.031) |
1.80 (0.071) |
B |
3528-21 |
3.50 (0.138) |
2.80 (0.110) |
1.90 (0.075) |
2.20 (0.087) |
0.80 (0.031) |
1.40 (0.055) |
C |
6032-28 |
6.00 (0.236) |
3.20 (0.126) |
2.60 (0.102) |
2.20 (0.087) |
1.30 (0.051) |
2.90 (0.114) |
D |
7343-31 |
7.30 (0.287) |
4.30 (0.169) |
2.90 (0.114) |
2.40 (0.094) |
1.30 (0.051) |
4.40 (0.173) |
E |
7343-43 |
7.30 (0.287) |
4.30 (0.169) |
4.10 (0.162) |
2.40 (0.094) |
1.30 (0.051) |
4.40 (0.173) |
V |
7361-38 |
7.30 (0.287) |
6.10 (0.240) |
3.45 ± 0. 30 (0.136 ± 0. 012) |
3.10 (0.120) |
1.40 (0.055) |
4.40 (0.173) |
W1 dimension applies to Termination width for a dimen1_area only. |
|