Logon Timeout network connection interrupted
(including Thunder 7.2, Thunder 7.9, the Thunder Prestige Edition, all network applies)
1. It is recommended to restart the Thunderbolt.
2. Close the kill soft, firewall, and other flow monitoring software.
3. Unplug the network cable or do not connect to the router, reconnect the Internet and try again later.
4. To the computer here Delete c→program Files→common Files→thunder network→tp→
Ver1 files. After removing, restart the Thunder attempt.
5. Invalid please go to the Control Panel on the computer-uninstall Thunderbolt 7, then, login http://dl.xunlei.com to download a new
Thunderbolt to install the attempt. (Be sure to uninstall after reinstalling, it is best to replace the disk installation, to avoid overwriting the old problem).
6. Try the number of global connections 100.
Number of connections to modify the way: Open Thunderbolt 7 in the configuration center → left my download → Common settings to modify,
Then apply the bottom right, as shown below.
7. Download the Repair Tool
8. Please select the corresponding Thunderbolt version and server, after the successful selection, the tool will automatically jump ping server
Note: In addition to the network outside the telecommunications Unicom, please select the carrier server first
There are generally two types of results after the ping:
The first: Ping is not, the following figure directly shows the timeout.
Because the server has four (as shown below), you can try to ping another server to see if it can be spelled.
The second: You can ping through the following figure click "Application Configuration", here will be automatically written to hosts,
Prompt application configuration successful, then restart the Thunder, see if you can log in.
If four server Operators, Telecom, Unicom, Shenzhen Server are the following figure "request Timeout" prompts, it is a network problem
Solution: Find a network operator to solve the problem of the IP ping impassability.
If the above actions cannot be resolved, please provide the following information and call 400-1111-000 feedback:
4.QQ (Convenient location processing):
5, the region, the network:
6, network type (for example, home, community, Company): Company network
5, the problem description:
6, the provision of Hosts file (Hosts file address: c:windows/system32/drivers/etc/hosts)
7, the use of the elimination method:
1. Close Kill Soft Firewall
2. To remove Ver1 files adjust the maximum number of connections "4" to reload the Thunder "5" Ping server did not time out, select application configuration Restart Thunder still unable to log in
