TLS-S1III-S50III Dual-Display spring tension test machine

Kai Dong Chunhui Machinery Equipment Co., Ltd., in the industry is a strong visibility, whether in product development, or in the procurement of products, the advantages are very obvious. So, when it comes to tls-s1iii-s50iii even show Spring tension test machine This product, small series is want to share with you to discuss a few knowledge points.

Product Overview

The dual-display spring tension testing machine is made according to the technical requirements stipulated in the technical conditions of spring tension testing machine jb/t7796-2005, which is designed for the detection of spring. This paper mainly makes tensile and compressive tests for various helical springs, that is, the force and displacement height of the test spring at a certain point, also can be used for other elastic elements and small mechanical properties test. The machine has simple structure and convenient maintenance, and it is a new generation of spring tension testing machine suitable for our country's condition.

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/71/18/wKioL1XFv36htMMiAACiKJctJiQ198.jpg "title=" Product picture a.jpg "alt=" Wkiol1xfv36htmmiaacikjctjiq198.jpg "/>

___________________________________________

Kai Dong Chunhui Machinery Equipment Co., Ltd.

No. No. 435, Gonghe New Road, Shanghai

021-51085327

Fax is 021-36174137

Email: [Email protected]

___________________________________________

Describe

1: Host: Using this structure, the stiffness and strength of the frame can be fully guaranteed, while also ensuring the accuracy of the test results.

2: Transmission mode: Through the manual way to drive the middle beam horizontal and lower movement.

3: Measurement control System: The electrical part is composed of measurement display system. The test force measurement display system is composed of high-precision load sensor, measuring amplifier, A/D conversion, digital display table, voltage stabilizing power supply and so on. and has the overload protection function, the displacement measurement display system consists of the photoelectric encoder, the frequency-doubling shaping circuit, the counting circuit and so on.

4: Test process: The main functions are described as follows:

4.1 Can test the load value and displacement value at any point.

4.2 The test results of any three test points can be printed.

4.3 can store 99 measurement data and print any query.

4.4 Using ISP Technology program, the deformation of load sensor is automatically corrected.

4.5 bit shift, test force arbitrary clears zero, can display the peak.

4.5 Safety protection device: with overload protective function.

As described above a few knowledge points, look forward to be able to give you some inspiration. More product information, can be with Kai Dong Chunhui Mechanical Equipment Center, get direct contact.

This article is from the "Spring Testing Machine" blog, please be sure to keep this source http://qidong2015.blog.51cto.com/10603240/1682925

TLS-S1III-S50III Dual-Display spring tension test machine