Tp-link Router fault dialing problem resolution

Source: Internet
Author: User
Tags reset

Tp-link Router failure

If the following figure shows up after the router is set up, the IP address, subnet mask, gateway, and DNS server are not visible, and there may be several reasons for dialing problems.

Cause and solution of Tp-link router fault

1. First observe the Adslmodem on the ADSL led, under normal circumstances, the modem power network cable, LED flashing, network connection after the flashing stop turn to long light.

2. If always flashing does not appear long bright, the adslmodem with the local switch can not sync, may be the configuration process in the Internet password is not correct, it is recommended to re-enter again.

3. If the problem is still likely to be Adslmodem enabled routing mode, you need to reset Adslmdoem to bridge mode.

4. If the user does not reset the bridging mode, refer to the Modem Factory manual or contact the service provider.

5. Is not bridge, you can connect the computer with the modem, and on the computer to dial, after dialing can be connected to the Internet, it means that the modem mode of work for the bridge.

6. If the ISP binds the MAC address on the network card to the ADSL line, the MAC address of the router can be copied to the WAN port of the router using the IP address cloning function.

7. If all three of the above may be excluded, it is clear that Adslpppoe dialing is not a problem. Users need to query their own broadband access, because different access mode dial-up software is not the same, although the authentication protocol used is PPPoE, but dial-up will not succeed.

8. If the digital TV 10M bandwidth, it is recommended to find a 10/100m adaptive hub, the broadband access line on the hub, and then connect the hub to the router Wan, after such a rate-matching process, dialing problems can be solved.

It is recommended that users run Dial-up software on the computer before using the router, and fill in the username and password dialing. Because the Dial-up software is the service provider's specialized software, verifies obtains the accurate access way after buys the router also not later.

Tp-link router failure in dial-up Internet problems do not panic, in accordance with the methods provided in this article to try, hoping to help you on the issue of dialing.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.