USG 6330 maps a section of ports

A port -to-server conversion is achieved by using the destination Nat .

2.2.2.2 is the USG public interface address,192.168.104.251 is the address of the server that needs to be mapped.

The configuration is as follows:

ACL 3000

Rule 5 Permit TCP destination 2.2.2.2 0 Destination-port range 10000 10200

Quit

Firewall Zone Untrust

Destination-nat Address 192.168.104.251

Quit

This article is from the "Lone wolf" blog, please make sure to keep this source http://yiliang.blog.51cto.com/936874/1765255

USG 6330 maps a section of ports