Using the Win7 system to quickly create a USB disk with function

We usually create a USB flash drive, will choose some production tools, although the production tool made Easy freehand brushwork, but the master can not like to borrow tools to make the launch of a U disk Oh, they prefer to use the traditional cmd command to quickly create, if you also want to become a master, then may wish to look at the following this tutorial.

CMD Basic command:

DiskPart//Call DiskPart command

List disk//list disks

SEL disk *//select the disks corresponding to the USB drive *

Clean//Empty the disk, that is, all data on the USB drive

create partition primary//creating primary partitions on this disk

Format Quick//quick formatting, format as system default format

Active//Active partition

Exit//Exit

Knowing some of these basic commands, we can start using the command to create a USB drive.

Use the WinRAR to open the mirror file and unzip the data to the U disk. After the decompression is complete, the system starts the USB disk and completes the production. At this point restart the selection of startup items, you can choose to boot from the U disk.

1. Use the win key +r into the CMD interface.

2. Enter DiskPart.

3. Enter a list disk (showing all disks under the current system).

4. Input select disk 1 (1 is my disk number, 0 is the computer with the hard disk, pay attention to the size of the correct choice of u disk). 5. Clean (Clear the contents of the U disk, before clearing the attention to save).

6. Create partition primary (set up primary partition on U disk).

7. List partition (view the partition on U disk).

8. Select partition 1 (select the primary partition you just established, and the number for one partition is 1).

9. Active (active primary partition).

Format Fs=ntfs Quick (Quick Format U disk).

11.exit (Exit DiskPart).

12. Re-insert the U disk. Then will install the system's ISO file to extract to the U disk, it is OK.

13. Set the BIOS can be installed from the U disk installation system from the command line to create a U disk Startup disk is very simple, do not use other special tools.

The above method does not require us to use other tools to avoid the implantation of malicious plug-ins to create a pure system. Although the use of CMD to create a U disk for unfamiliar friends may be more cumbersome and time-consuming, but if you can personally try to use cmd command to create a U disk, I believe you will love this method, after the study you will find it more than the ordinary use of tools to produce more efficient and fast.