Virtual Machine Network configuration in VMware workstation

VMware has been using virtual machines and UVP and Cirtix virtual machine, and then to the VMware workstation, but it is not a problem, this is how it is, the following describes my study encountered problems and solutions.

First, the preparatory work:

VMware workstation11 for http://xiazai.sogou.com/detail/34/13/3543595921374893595.html?w=1927;

openSUSE's operating system: http://www.9553.com/soft/13723.htm

Second, install VMware Workstation:

Installing workstation is simple, download the installation package follow the instructions to install it.

Installation can refer to the following http://jingyan.baidu.com/article/fcb5aff7924244edab4a716e.html;

Third, create the virtual machine:

1, running VMware Workstation;

2, choose to create a virtual machine;

3, go to create Virtual Machine wizard, select Typical;

4. Click Next, select "Setup CD image file (ISO)",---------if "Install operating system later" will create a bare virtual machine, i.e. a blank hard disk with no OS;

5, name the virtual machine and the storage location of the virtual machine;

5, specify the size of the disk capacity, select the default value;

6, click Next, to be ready to create the virtual machine interface, click Finish;

7, enter the virtual machine creation interface;

8. Select Install installation and wait for the installation and configuration of the openSUSE program yast to load;

9. The Welcome screen yast will appear on your screen. All yast pages follow the same interface: The menu on the left shows you the progress of the installation, the main screen shows different features, and at the bottom there are the same help, Abort, return and Next buttons.

Select your language on this screen. The keyboard layout is automatically set depending on the language. If your keyboard layout is different from what YaST chooses, go back and set it yourself to correct it. In addition, you need to accept the license agreement. Click View License to expand the license agreement. Once you accept the license, click Next.

10. System Analysis YaST will now start analyzing your computer to determine what settings it should use for its installation. You can wait for him to finish it automatically.

11, next you say choose openSUSE 11.0 installation mode;

Most users just need to keep the default installation. If you have an earlier version of openSUSE installed, you can select Update to upgrade the version to openSUSE11.0. If you need your installation of the openSUSE 11.0 repair installation system option can be used to evaluate and repair your installed openSUSE system. If you want to customize the entire installation settings, including hardware configuration, you can cancel the use of automatic configuration. This is only recommended for users who know how to set it, and this increases the time it takes to install openSUSE 11.0.

12, set the time and timezone, if the time zone is incorrect, select Change ... to adjust;

13, the choice of the desktop, here, you can choose you want to install pensuse contained in one of the three desktop environments. Keep in mind that this is only the initial choice. Later during the installation process or even after your installation is complete, you can continue to add gnome, its KDE, and even more like the X Window Manager of Xfce. Here the author is using KDE, this according to their own needs to choose;

14, set up the disk, create users, please edit according to the actual situation;

15, installation overview, this time more important, you can make software changes ;----Here you can increase the installation of gc++/dhcp/ftp and other software sources.

16. Installing openSUSE

17, automatic installation (do not control him, automatic configuration can be)

18, the installation is complete.

Iv. Configuring the virtual machine network;

1, running virtual machine;

2, select the virtual machine, right-click "Settings", enter the virtual machine settings interface, check the network adapter, according to the following considerations to select the network connection;

Note:

VM Networking methods:
1, bridging: Can be in the virtual machine between the interoperability, but also with the external network interoperability;---Real machine and virtual machine in the same network segment, cut to the Internet
2, Host-only (host only): can only be in the virtual machine between interoperability, not access to the external network;
3, NAT: Network address Translation (protocol) Real machine and virtual machine is different network segment but can be online to hide the virtual machine in the room behind the network card, the virtual opportunity to obtain a new network segment, and then the virtual machine into the physical network card IP to connect the extranet. NAT converts private IP to public IP, address translation

3, to change the network card configuration IP

I: Edit the corresponding Nic file in/etc/sysconfig/network;

2: Go to the graphical interface, select YaST "Network Configuration" NIC Configuration "Configure network card IP

3. Click Edit

4, the IP configuration

Note: The IP here needs to be configured according to the type of network card selected

4, click Next "Next" > Save the configuration can be;

5, turn off the firewall, open the SSH service;

Execute service iptables stop firewall, perform service ssh start to open SSH service;

When this happens, the virtual machine can use the ~~~~~ in the LAN

Virtual Machine Network configuration in VMware workstation