1210 Flash tutorialThere is a risk of Flash brush, please be careful!
1. Download the Rom from somewhere else, decompress it, and ensure that the Jupiter. Abi, jupiter_spbl.abi, and Flash brush software are in the same directory.
2. Ensure that your battery power is sufficient and the connection line has no quality problems (this is important. The first step is to brush eboot. If your cable or USB port has problems, the flushing will fail, the machine is dangerous to change bricks), and install the synchronization software ActiveSync.
3. Unplug and close the data cable.Mobile phone, Navigation key press direction, then press the on key (about 2 seconds), release
4. A red downloading screen will appear.
5. Connect to the computer. Then, the computer will prompt you to find the new hardware. Then, the driver will be automatically installed and the prompt will be completed. Open the Flash software in the Rom, click Next step, and click upgrade.
6. After clicking the button, the progress bar of the mobile phone will change. after about three downloading and upgrading changes, the progress bar on the computer will be about half done. A prompt will be displayed, indicating that the refresh is successful and the mobile phone will automatically restart.
7. Unplug the data cable and complete the flash.