WAF Development History

Source: Internet
Author: User

With the development of routing, people have higher requirements on the network, and routing plays a key role in it. here we will explain the development of the routing switch technology and its future prospects. Ethernet machine, which is a SWITCH in English, is also translated as a SWITCH or a SWITCH-type hub. Let's first review the development process of LAN.

The combination of computer technology and communication technology has promoted the rapid development of local computer networks. From the appearance of ALOHA at the end of to the appearance of Mbps switched Ethernet in the middle, in just over thirty years, it has taken a leap from work order to duplex, from sharing to exchange, from low speed to high speed, from simple to complex, from expensive to popular.

In the middle and late 1980s s, due to the sharp increase in traffic, the development of technology led to the increasing performance of the LAN. The earliest 1 Mbps speed was widely replaced by today's 100BASE-T and 100CG-ANYLAN, traditional media access methods are limited to making a large number of sites share access to a public transmission media, both CSMA and CD.

In the early 1990s s, with the improvement of computer performance and the increasing traffic, traditional local area networks have already surpassed their own load. Switched Ethernet technology emerged, greatly improving the performance of local area networks. Compared with the network topology of the shared media based on bridges and devices, the network routing switch can significantly increase the bandwidth. With the addition of the exchange technology, you can establish a geographically dispersed network, so that each port of the LAN routing switch can transmit information in parallel and at the same time, and the LAN can be highly expanded.

From Bridge, multi-port bridge to route Switch

The development of LAN switching technology goes back to two port bridges. A bridge is a forwarding device used to connect to a similar LAN. From the perspective of the network structure, the bridge is an end-to-end connection at the DCE level; from the perspective of the layer, the bridge forwards data frames at the logical link layer; similar to the functions of a repeater on the first layer and the device on the third layer. Two-port bridges are developed almost simultaneously with Ethernet.

The ethernet SWITCH technology was developed on the basis of multi-port bridges in the early 1990s S and implements the lower two layers of the OSI model, which is closely related to bridges, even known by industry insiders as "many associated bridges", the current exchange technology is not a new standard, but a new application of existing technologies, it is an improved LAN bridge. Compared with traditional bridges, it can provide more ports (4 ~ 88), better performance, stronger management functions, and cheaper prices. Some LAN routing switches now implement Layer 3 of the OSI reference model to implement simple routing selection. Currently, Layer 3 switching is very popular. The Ethernet route switch is similar to the telephone route switch. In addition to the STOREANGFORWORD mode, it also provides other bridging technologies, such as CUTTHROUGH ).

Working principle of switched Ethernet

The principle of an Ethernet route switch is very simple. It detects the Source and Destination MAC (media access layer) addresses of packets from the Ethernet port, and then compares them with the dynamic search table in the system, if the MAC address of the data packet is not in the query table, add the address to the query table and send the data packet to the target port.

Advantages of switched Ethernet Technology

For switched Ethernet, you do not need to change other network hardware, including cables and network adapters. Instead, you only need to change the shared HUB with a switched route switch to save your network upgrade costs. You can switch between high-speed and low-speed networks to achieve collaboration between different networks. Currently, most switched Ethernet networks have Mbps ports. The corresponding Mbps Nic is used to connect to the network. This solves the bottleneck of 10 Mbps and becomes the preferred solution for upgrading the network lan.

It provides multiple channels at the same time, providing more bandwidth than the traditional shared hub. The traditional shared 10 MBPS/100MPS Ethernet adopts the broadcast communication mode, and can only communicate with one user at a time, in case of a collision, you have to try again, while the switched Ethernet allows transmission between different users. For example, a 16-port ethernet route switch allows 16 sites to communicate between eight links.

Especially in terms of time response, lan routing switches are favored. It provides a higher bandwidth and a higher speed than the router at a lower cost than the router. unless there is a requirement for a wide area network (WAN), the routing switch has a tendency to replace the router.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.