What about the blue screen when you insert a U disk?

Nowadays, we all use U disk to install the system, insert the U disk, enter the PE interface ghost the system, and then wait for the system installation process. But some netizens inserted a U disk after the boot appeared blue screen phenomenon, code for 0x0000007b, pull out a U disk reboot but also can smoothly into the system installation program, this is what cause?

Blue screen

One of the reasons, there is a disk error or a file error in Windows system partition.

Solution: Perform a disk scanner to fully test all disk drives to see if there is a disk error or a file error on the disk drive.

Cause two, the motherboard's SATA or IDE controller drivers are damaged or improperly installed.

Solution: Reinstall the SATA or IDE controller driver provided by the motherboard driver.

The third reason is that the computer has been attacked by malicious programs such as viruses, Trojans and rogue software.

Solution: The implementation of security protection software for the computer to conduct a comprehensive check to see if the computer has been virus, Trojan, rogue software and other malicious programs attack.

In addition, if it is the cause of u disk poisoning, we can also use U disk PE tools to repair U disk, if the hard disk is also infected with the virus, can also be used to restore the hard disk to rebuild the MBR, rebuilt the MBR after the U disk, is not to start the PE tools on the U disk, this time to run the original PE production tool repair, or redo U disk pe! so the blue screen will be gone.

Above is to insert U disk on the computer, turn on the blue screen phenomenon, unplug u disk and can enter the system smoothly, mainly because the system partition has disk error or file error, motherboard SATA controller damage and computer suffers from viruses, trojans and other software.