What do I do if the WIN10 Professional Edition wireless network is restricted or not connected?

WIN10 system often encounter some network failure, or the network icon appears Red Fork, or network icon display exclamation mark, etc., a netizen in the use of wireless network connection when the network is limited or no connection, what should I do? There are many reasons for this to happen, Usually the user can follow the following several ideas to solve.

650) this.width=650; "Src=" http://www.win10zyb.com/d/file/win10jiqiao/2016-07-22/ 347fa8a7ea034686e59dfab113ef7616.jpg "alt=" qqqq.jpg "width=" "height=" 337 "style=" FONT-FAMILY:INHERIT; font-style:inherit;font-weight:inherit;vertical-align:middle;border:0px;margin:0px auto;width:700px; "/>

　　IDEA One: Check network and router signal is unblocked

First, verify that the network is not in charge, the wireless router line connection is good, wireless network signal transmission is normal.

If the problem is determined to be a router, Macau gambling website may wish to restart the router or restore the router settings to the factory state.

Also, if available, update the wireless router firmware and the computer's wireless network adapter driver to the latest version.

Think Road Two: Check Network Service status

Press Winkey+r to start the run, and type "services.msc" to start the Service Management window. Verify the status of the network service such as the DNS client, DHCP client, and IP helper (on by default), and then restart the computer.

　　Idea three: Check the IP address and DNS server address

1. Right-click the wireless network icon on the right side of the taskbar and select "Open Network and Sharing Center" (also found in Control Panel);

2. In the Network and Sharing Center window, click "Connect" on the right side of the active network status.

3. In the WLAN Status window, select "Properties";

4. Double-click Internet Protocol version 4 (TCP/IPV4) in "This connection uses the following items";

5, confirm that the required IP address and DNS server address input is correct, after the change is completed, press "OK" to exit (by default, automatic acquisition). For a wireless network that is bound to an IP address and a DNS server address, enter the specified IP address and DNS server address.

What do I do if the WIN10 Professional Edition wireless network is restricted or not connected?