What happens when Win7 is stuck in the self-test?

When you turn on the computer, the system will automatically run the motherboard BIOS chip curing program, known as post-Self-Test (Power On Self test)

Under normal circumstances, after the single self-test is complete, the system will look for the operating system from the hard disk, CD or network server to start, the system will control the computer.

In Safe mode, locate the wrong partition in the right mouse click to select Properties-Tools (Tabs)-"Error checking (options)"-"Start checking", check "auto fix Files" and "scan and attempt to recover bad sectors", and click "Start" when you are finished. The system divides the program into five phases to complete. The computer will reboot after the check is complete, which will solve the problem.

Another workaround:

Click Start, and then enter the "Chkdsk x: F" command in "Run" to fix the faulted partition. X represents the letter of the error. When an error message is encountered, CHKDSK stops displaying the message. If Chkdsk completes the task, the disk status information is displayed. If CHKDSK does not complete the task, it cannot open any files.

Generally speaking, the computer hard drive is caused by bad way.

Speed up the boot time by doing the following:

1, reduce the boot process, speed up the system startup. Click "Menu"-enter "msconfig" in "Run" to open the page, click "Start" in this page, here suggest you only stay: EfW, show off, Rav Tmer, Rav mom These three items rising antivirus software, at any time do the monitoring system, Ctfmom.exe is the input method display, it is best not to delete these three items, otherwise there will be trouble.

2, click the "Start Menu"-"So the program"-to find the "start" after the click on open, the contents of the inside removed. Some of the systems are self-contained and will start automatically even if the settings do not start.

3, click the "Start Menu"-"Control Panel"-"performance and Maintenance"-"Power Options", click the "Hibernate" tab. Be sure to select the Enable Hibernate checkbox and then click OK, if you want to turn off the computer, select Hibernate, and if you have standby in the Shutdown dialog box, press "Shift" to convert it to the "Hibernate" state. The next time the computer is turned on, it will automatically recover to the last shutdown state.

4, if your computer system is relatively stable, there are few failures, you can improve the boot speed through the following operations:

Click "Start Menu"-"Control Panel"-"performance and Maintenance"-"system", open the System Features-Advanced tab, click the "Start and Recover" button to open the Startup and Recovery dialog box, write "Time to System log" and "Send administrative alerts" under System failure Check out the two options, then open the "Write Debugging Information" Drop-down list, select "None", click "OK".

5, by reducing the boot to make the scroll bar scrolling times. Click "Start Menu"-Enter "regedit" in "Run" and find "Jkey-local-machine-system/current Contralset/control/sessin" in the pop-up window manager/memory Management/preech paramentrs "Branch, in the page right window to find" Enableprefecher "Zijian, its value set to" 1 ". Then right click on "My Computer"-"Properties"-"Hardware"-"Device Manager"-Expand IDE Ata/atapz Controller. Then double-click the secondary channel IDE, select Advanced in the dialog box that appears, and change to "none" for "automatic Detection" that is originally set up in the middle of "devices." With the above settings, the scroll bar is reduced to 3 times after the computer is rebooted (more than 10 times before setting).

6, click the "Start Menu"-In the "Run" input "regedit", in the pop-up page open "hkey-current-user/controlpaner;sesktop/", find "Hungapptineout", the value of it changed to "5000 "And the value of" Waittojillapptimeout "is also changed to" 4000 ". When "Hkey-local-mach-system/currnentcontralset/control" is turned on, find "WaitToKillServiceTimeout" to change its key value to "4000".