What should I do if the signal strength of the tplink wireless router is not strong?

I. Application introduction

In environments of different areas, the wireless transmit power requirements for routers are different. When the signal quality is guaranteed, the wireless power requirement is higher in environments with larger area (obstacle. In a small environment, the wireless power of the router is adjusted to a small value, which can save energy, reduce the possibility of network interference, and reduce the radiation.

This article describes how to adjust the wireless power of a router.

 

II. Setting method

Vrouters can be divided into cloud routers, new interfaces, and traditional interfaces based on the management interface. The setting methods for different interfaces are slightly different. Please refer to the actual situation.

Vro

There are two ways to adjust the signal strength of a vro. You can adjust the signal strength on the management interface or by using the mobile APP. The setting method is as follows:

1, In the vro management interface adjustment

Log on to the vro management page and clickApplication Management > Installed applications, EnterSignal adjustment, Select according to the actual situation, as shown in the following figure:

Note:: If the vro is equipped with a Turbo button, the signal strength adjustment only has two options: energy saving and enhancement.

2Adjust the wireless power of the mobile APP

Before setting up, scan and download the install TP-LINK mobile APP:

Follow these steps:

Traditional interface router

Log on to the vro management page and goWireless Settings > Advanced Wireless Settings,Transmission powerSelect high, medium, or low. ClickSave.

Note:: Some routers on the traditional interface do not support adjustment of transmission power. The actual product application prevails.

III. Answer questions

You may be concerned about the following issues:

What are the criteria for adjusting wireless power?

A: adjust the wireless power according to the following table:

Intensity type	Intensity value	Applicable environment
Enhancement (high)	100%	Common home environments, separated by two walls
Regular (medium)	50%	One room and one hall, separated by a wall
Energy saving (low)	25%	Single room or empty environment with a radius of 10 meters

Note:: This table is for reference only.

After the signal is adjusted, the intensity does not change?

A: By default, the wireless power is enhanced (or high. If there are many obstacles in the environment, resulting in greater signal attenuation, we recommend that you expand the signal.