What to do when the computer can't see the video or the card after installing the router

1, confirm that the router WAN port has been successfully connected to the router interface, click the network status, confirm that the router WAN has been networked successfully

If the router WAN is not networked successfully, then there is no network, check your broadband is normal, WAN port to connect the cat's network cable socket.

2, verify that the router does not set bandwidth control

The bandwidth control is set in the router interface, and the bandwidth setting is small, which may cause the terminal equipment not to watch the video properly, it is recommended to turn off the bandwidth control function and try again.

3, verify that the router does not set up Internet control

The router has a firewall, parental control or Internet control functions, shielding the video site or video software related ports, will cause the terminal can not watch the video. If not necessary, please turn off the Internet control function.

4, excluding other terminal effects

If the other terminals are carrying out large traffic applications (such as downloads, games, etc.), in the case of low bandwidth, may cause the computer to watch the video of cotton, loading slow or unable to load, and so on, it is recommended to temporarily disconnect other terminals, and then try to watch video.

5, the replacement of other video resources

A problem with the video resource itself may result in an inability to view it properly, please replace the other video test to see if it is OK.

6, check the terminal problem

Make sure that the plugin or video software that the terminal is playing video is properly installed and in the latest version, you can try to uninstall the playback plugin or video software reinstall, or replace the other video playback software.