Wireless devices work abnormally after replacing a use site

The purchase of wireless network equipment, network use has been normal, but in the replacement of the use of the site, there are abnormal work, and do not know how the interference came.

The frequency segment used by the general wireless network belongs to the 2.4GHz High frequency range, the daily life, the work and so on the electrical equipment, because the frequency difference is very big, therefore does not have the mutual interference situation. At present, it is found that the main interference devices are microwave ovens and other individual appliances. Wireless network equipment to stay away from these appliances. Replacing a channel to avoid interference is simpler when it is not convenient to look for potential disturbances because the wireless network itself has more than 10 channels to adjust. It is difficult to use the wireless devices in the actual use of natural disturbances.

In addition, you can make the signal receive better by following the steps to adjust again. The AP is placed on a flat desktop, the antenna and the angle of the horizontal surface adjustment, the smaller the signal can traverse the greater the thickness of the barrier, to avoid the signal through the metal material, to confirm that the wireless AP is in the best acceptable position; AP as far as possible in other electrical appliances at least 1~2m distance.