Wireless network card link No Line by the network set up detailed

Wireless networks have been gaining momentum recently, and the slogan for popular wireless networks is further grabbing the market. Wireless products Set price also drop again, not to let people heart, but many friends in the installation and deployment of wireless networks encountered a variety of problems without reference. In this paper, the market on the relatively hot Tp-link 54M wireless Set As an example to explain how to operate the computer installed wireless network card to connect wireless Broadband router, build their own wireless LAN.

The wireless router in this article chooses the Tp-link domain show? 54M Wireless Broadband router tl-wr541g, wireless network card is selected Tp-link domain exhibition/speed display wireless network card tl-wn510g/550g/610g/650g products.

First, wireless router configuration

1, into the TL-WR541G configuration interface, the "Wireless network Basic Settings" interface default configuration of the following figure:

2, the meaning of each parameter in the page:

SSID: The service Set identifier used to identify a wireless device. The wireless router uses this parameter to mark itself, so that the wireless card can differentiate between different wireless routers to connect. This parameter is determined by the wireless router and not by the wireless network card. Another way of thinking, such as wireless network card around the existence of A and B two wireless routers, they are using SSID A and SSID B to mark their own, when the wireless network card connection who is the identifier through the SSID to distinguish between the signs. Here we use the default SSID is Tp-link, of course, you can change this parameter according to your preferences, to an easy to remember the number or letter or combination of both.

Channels: Used to determine the frequency of the work of the network, the selection range from 1 to 13, the default is 6. This parameter should only be noted in the application: Suppose your neighbor's home is also a wireless network, and the channel is 6, this time to reduce wireless interference between two wireless routers, you can consider this parameter can be changed to 1 or 13.

Mode: This parameter is used to set the operating mode of the wireless router, there are two options are 54Mbps (802.11g) and 11Mbps (802.11B), generally this parameter we do not need to make changes, the default can be. One thing to be aware of is: Suppose you buy our speed exhibition? 108M Wireless Broadband router tl-wr641g, then there are two more options in this parameter total four are 11Mbps (802.11b), 54Mbps (802.11g), 108Mbps ( Static) and 108Mbps (dynamic), with more than two modes of statically 108M and dynamic 108M, when to choose 108Mbps (Static) and when to choose 108Mbps (dynamic)? You can determine this: If the wireless network card models connected with WR641G are all the speed exhibition of our company? 108M Wireless network card tl-wn610g/650g, this time can choose wr641g work in static (static) 108Mbps mode, in addition to other circumstances, all choose dynamic ( Dynamic) 108Mbps or 54Mbps (802.11g) mode.

Turn on wireless: Make tl-wr541g wireless function turn on and off.

Allow SSID broadcasts: By default, wireless routers advertise their presence to the surrounding space broadcast SSID, in which case the wireless network card can search for the presence of this wireless router. If the check box here to remove the hook, that is, the wireless router does not carry the SSID of the broadcast, in this case the wireless card can not find a way to the existence of wireless router.

Above this is the tl-wr541g "wireless Settings" inside the default parameters, when the wr541g power, will be in the wr541g around the generation of a wireless network, the network's SSID identifier is "Tp-link", the work channel is 6, the network is not encrypted. At this time a wireless network without encryption exists in the vicinity of the wr541g, can be provided to the wireless network card to connect;