Wireless router Setup detailed graphics and text tutorial

Wireless router Setup detailed graphics and text tutorial

1. First will tp-link wireless router through the link of the network cable to connect, in IE input 192.168.1.1 (individual is 192.168.0.1, specific look at the bottom of the router), username and password default for admin, login can enter the wireless router settings interface.

Open the wireless router Settings screen Generally, a setup wizard box will pop up, many people will ask how to use the wireless router ah? In fact, it is so simple to press the next step to set the wizard, easy to complete.

Select "PPPoE" to set up the next step by asdl dial-up Internet users

2. If you choose "PPPoE" for the next step by asdl dial-up Internet users. Local area networks or other special network connections (such as video broadband, Internet access through other computers, and so on) can choose the following two "Ethernet broadband" to do the next step. ADSL dial-up Internet Settings The next two items will be described later. ADSL dial-up Internet account and password input interface, as prompted by the wizard interface to enter the necessary information, such as users in the network service provider provided by the "Internet account" and "password" and then press the next step.

Wireless status, SSID, band, mode four parameters

3. Next you can see the wireless status, SSID, band, mode of these four parameters. Users who do not detect wireless signals are aware of whether their router wireless status is turned on.

SSID This user can modify the addition according to their hobbies, this is only when the wireless connection to search the device can easily be used to connect the device identification name.

In addition in the frequency band this item we pulled down can see to have 13 digit choice, here the setting is only you route the wireless signal frequency band, if you have many without the line to be possible in the vicinity you can set up uses other frequency bands to avoid some wireless connection conflict.

Then the mode of this option pulls down we can see Tp-link no line by several basic wireless connection mode, 11Mbps (802.11B) maximum operating rate of 11mbps;54mbps (802.11g) maximum operating rate is 54Mbps, Also backward-compatible 11Mbps. (in Tp-link no line from the product there are some of the speed Show series unique 108Mbps mode of operation).

Advanced Settings

4. Next to the advanced settings I will briefly describe each set of options for the page and set parameters.

First, here is the first option run state. Just now we have to Tp-link no line by the settings are reflected in the above, if you are ADSL dial-up Internet users Here you can connect the page directly to the network, if you are Ethernet broadband users through dynamic IP or fixed IP connection to the Internet, here will also appear the corresponding information.

LAN port settings in network parameters

5. In the network parameters in the LAN port settings here, we just keep the default settings on it. If you have a certain understanding of the network users can also set the IP address and subnet mask according to their preferences, as long as the attention does not and other workstations of the IP conflict is basically not much of a problem. Remember to restart the router after you have modified it after saving.