Wireless Security Settings of tengda Wireless Router

Tengda Wireless Router Security Configuration-WPS settings

WPS can be easily and quickly configured inWirelessEstablish an encrypted connection between the network client and the tengda wireless router. You do not need to select the encryption mode and set the key. You only need to enter the Correct PIN code or select the PBC (or press the WPS button on the rear panel) WPS.

WPS: used to disable or enable WPS. Enabled by default.

WPS mode: supports two types of simple WPS settings: Push-Button Configuration and PIN code.

PBC: select the PBC and click "save" or press and hold the WPS button on the back panel for about one second. At the same time, enable WPS/PBC on the client for connection.

Procedure:

After you press the WPS button for 1 second, the WPS light will flash for about 2 minutes, indicating that the function is enabled.

During the time period, the wireless client can enable WPS/PBC for authentication and negotiation. After successful negotiation, the WPS indicator is always on, which completes the access process for a wireless client. If you want to access multiple wireless clients, repeat the preceding process to support up to 32 wireless clients.

PIN: If you want to use the PIN, you must know the PIN code of the wireless client. Add it to the input box and save it. At the same time, connect the client with the same PIN code.

Reset OOB: When you press this button, the WPS indicator is off and the AP does not respond to the WPS client connection request.

Note: The WPS function can be used properly only when the wireless Nic is supported.

Tengda Wireless Router Security Configuration-WPA-PSK

WPA protects data of WLAN users and only authorized network users can access the WLAN.

WPA encryption rules: Select AES Advanced Encryption Standard) mode and TKIP temporary Key Integrity Protocol) mode.

Key: Enter the encrypted string you want to use. The key consists of 8 to 63 ASCII characters.

Key Update cycle: generates a validity period for the key you set.

Tengda Wireless Router Security Configuration-WPA2-PSK

WPA2 (Wi-Fi Protected Access version 2) provides better security than Wi-Fi Protected AccessWPA. In addition to TKIP encryption, the new encryption mode AES is also provided.

WPA encryption rules: select the Data Encryption type, support advanced AES Encryption Standard) mode, TKIP temporary Key Integrity Protocol) mode, TIKIP & AES hybrid mode.

Key: Enter the encrypted string you want to use. The valid character is ASCII. It can be 8 to 63 characters in length.

Key Update cycle: generates a validity period for the key you set.

The wireless security settings of the tengda wireless router have been introduced to you. Please follow the steps and methods described above to successfully protect your wireless network. Please try it yourself!