XenServer 6.5 Installation configuration graphics and text tutorial _xenserver

Cut the crap and go straight to the horse.

First download the xenserver6.5 ISO image file, the physical machine on the disk installation, virtual machine directly using the ISO image installation

XenServer6.5 Download Address: http://www.jb51.net/softs/391981.html

1. Installation Interface

2. Keyboard mode selection Default-American, OK

3. Here remind you to install will erase disk information, do backup, OK

4. What do you think, of course, it's accept.

5. The server's CPU does not turn on virtualization, please open virtualization and continue

6. Choose to install on the local hard drive, the first item, OK

7. Install media select Local disc, First, OK

8. Whether to install the patch package, select No

9. Detect if there is a problem with the installation package, OK

10. Set the root password, OK

11. Set the network information, the best static address, OK

12. Set up a DNS server, OK

13. Regional election Asia,ok

14. Time Zone Select Shanghai,ok

15. Server Time Settings

First: Use NTP server to synchronize server time (set NTP server address in step 16th)

Second: Use local time (but during the installation process, such as step 19th to set local time)

This example selects the second item: Use local time, so skip the 16th step directly

16. In step 15th, if you chose to use an NTP server to synchronize time, you need to set the address of the NTP server here

17. When the preparation is done, then install.

18. In the installation ...

19. If you set the use local time in step 15th, the time setting will pop up in the installation, OK

20. Installation Complete, OK

Reboot the server after 21.ok

22.xenserver6.5 successfully launched the interface, this interface can be network, host name and other information

At this point, the installation is complete