Ghost system backup Diagram

I. Preparations



After the system is installed, the system will be backed up in a timely manner to prevent unexpected events. After the system is restored, it will take three to five minutes to complete. You will also have a completely new system.
1. Download the ghost program
, Unpackage to a non-system disk, and create a folder. For example, create a folder ghost on the edisk and put the ghost program and backup file under the same folder for Future Search and operations.

2. Ghost is a famous backup tool. to back up the System Disk in DOS mode, you must install a virtual floppy disk to start it.
Or maxdos
, Or the dwarf dos toolbox
To form a dual-start system. For how to use a virtual boot floppy disk, see how to use a virtual boot floppy disk.

3. Optimize the system. See system optimization settings
, XP System Service startup Item optimization settings

4. Clean up the system and delete system garbage. See system cleanup

Ii. system partition backup


1. Restart and select to enter the DOS system, and go to the backup disk (enter the command "E:" And press Enter) to enter the Backup Directory (enter the command "cd"
Run the ghost program (enter the command)
Press "ghost" and press Enter) to start the ghost program. Press "OK" and press "enter" to enter the screen. Press the cursor key and select "local"> "partition ".
Area) → to image (generating an image file) "(see figure 1). This step cannot be wrong. The order of selection from top to bottom is 1-2-2.

2. The screen shows the hard disk selection screen. Select "1" for the hard disk where the partition is located. If you only have one hard disk, press Enter.

3. Select the partition (that is, the source partition) of the image file to be created. Use the up and down keys to select partition "1" (that is, partition C), and press the tab key to switch to the "OK" button, press enter.

4. Select the location where the image file is saved. Press SHIFT + TAB to switch back to the drop-down menu of the selected partition and press the up/down key to select a partition, for example, "" means the first hard disk
The second partition, that is, the "D" disk. After selecting the partition, press the tab key to switch to the file selection area, and select the folder with the up and down keys. You can press the tab key again, switch to the "FILENAME" text box and type the mirror
File name, such as "XP" or "c_bak.gho", and press Enter.
Technical Support
:

We recommend that you create a ghost folder in the partition before backing up, put the ghost program and the backup file together, start the ghost program from the ghost directory, and then directly return to the image backup ghost directory, enter the backup file name and press Enter.

5. Next, Norton
Ghost will ask you if you need to compress the image file. Here, you can only use the left and right keys. "No" indicates no compression. "fast" means a small proportion of compression, but the backup speed is faster.
Fast; "high" adopts a high compression ratio, but the backup speed is relatively slow. Generally, "high" is selected. Although the speed is a little slow, the hard disk space occupied by the image file will be greatly reduced (not actually
), And the recovery speed is very fast.

6. After all the preparations are completed, ghost will ask you if you want to perform the operation. Of course, select "yes" and press enter to create an image file for you. The backup speed is closely related to the CPU clock speed and content capacity. Generally, it can be completed within 10 minutes.
When the progress bar reaches 100%, it indicates that the backup is complete. You can press the restart button of the chassis or press CTRL + ALT + DEL without exiting the ghost or dossystem.

Through the above work, we have made a C disk backup. When the system fails to solve the problem, we can easily restore the system.

Iii. System Backup and Restoration


1. Restart and select enter dossystem, go to the backup disk, enter the Backup Directory, run the ghost program, and select
Local → partition → from image (note that this time is "from
To the system disk. The order of selection from top to bottom is 1-2-3, and then reset
Restart.

2. Select the location where the image file is saved. Press SHIFT + TAB to switch back to the drop-down menu of the selected partition and press the up/down key to select a partition, for example, "" means the first hard disk
The second partition, that is, the "D" disk. After selecting the partition, press the tab key to switch to the file selection area, select the folder with the upper and lower keys, press enter to enter the corresponding folder and select the source file, that is *. gho text
And press Enter.
If
Is to start the ghost program from the ghost directory, you can directly see the ghost backup file under the directory. Move the cursor and select.

3. The legend indicates that the source file you selected is an image file of the primary partition. Ignore this and press Enter.

4. Here, the legend indicates that you can select a hard disk. If you only have one hard disk, you can ignore it and draw it back directly.

5. In this case, the legend indicates the partition to which the image file is restored. We only operate the C disk on one disk, so select primary, which means the C disk of the primary partition.

6. After all the options are selected, ghost will still ask you to confirm whether to perform the operation. Of course, we have to select "yes" and press Enter.
Wait until the progress bar reaches 100% again. Even if the image is successfully restored, press the "restart compter" option given by ghost to restart the system.4. Write batch processing files to create automatic system backup and Restoration



For example, you can create a ghost folder under the Bak folder on the edisk and store it with ghost. EXE program, E:/bak/ghost/ghost.exe-clone, mode = pdump, src = 1:1, DST = E:/bak/ghost/BAC. gho-Fx-Sure-Rb
Open notepad, copy the previous row, save it, and change it to BF. bat.

E:/bak/ghost/ghost.exe-clone, mode = pload, src = E:/bak/ghost/BAC. gho: 1, DST = 1:1-Sure-Rb

Open notepad, copy the previous row, save it, and change it to HF. bat.
Put these two files under the ghost directory. After entering dos, press BF and press enter to start ghost backup. Then press HF to restore the system. This is a customized two-key ghost.

: Pdump refers to backup, SRC is the source disk, is the first partition of the first hard disk, that is, drive C, DST is the target disk, E:/bak/ghost/BAC. gho
In order to store the path, the file name of the edisk bak/ghost directory is BAC. gho. You can modify and change the storage path and file name of the drive letter according to your needs.-Fx
To directly return to DOS after completion, pload indicates that the partition is restored to the partition.-Sure indicates that if a file with the same name is directly overwritten,-Rb
After the restoration or replication is complete, restart the system. In this way, you can enter the batch processing file name in the ghost directory under DOS to automatically back up and restore the file.

Reminder: the popular virus pandatv is very annoying. Once it is done, the hard-working gho file will be gone. To prevent it, it is necessary to change the gho file extension.