HP-UX. Back up local disk data to tape. hp9000 & tape array 5300

Back up all data on the local disk to tape
By default, you do not need to specify the file system device number. The value is "/dev/RMT/0 m ". However, if this device does not contain tape media or you need to apply other devices, you must add the parameter "-d" and specify the device number.

# Make_tape_recovery-AV
Output result:
* Creating local directories for configuration files and archive.

======= 11/28/06 14:40:15 eat started make_tape_recovery. (Tue Nov 28
14:40:15 eat 2006)
@ (#) Ignite-UX revision B .5.4.50
@ (#) Net_recovery (OPT) $ revision: 10.637 $

* Testing Pax for needed patch
* Passed Pax tests.
* Recovery archive description = recovery Archive

* Recovery archive location =/dev/RMT/0mn

* Number of archives to save = 2

* Pax type = tar

 
In? DSK/VG name minor # associated disks/mountpoints
2 V/dev/vg00 0x00/dev/DSK/c2t1d0/dev/DSK/c2t0d0
/Dev/vg00/lvol1/stand 2
/Dev/vg00/lvol2
/Dev/vg00/lvol3/2
/Dev/vg00/lvol4/tmp 2
/Dev/vg00/lvol5/home 2
/Dev/vg00/lvol6/opt 2
/Dev/vg00/lvol7/usr 2
/Dev/vg00/lvol8/var 2
/Dev/vg00/lv_oracle/Oracle 2
/Dev/vg00/lv_orainstall/orainstall 2
0 V/dev/vgdata1 0x02/dev/DSK/c16t0d1
/Dev/vgdata1/lv_data1/oradata1 0
0 V/dev/vgdata2 0x03/dev/DSK/c16t0d2
/Dev/vgdata2/lv_data2/oradata2 0
0 V/dev/vgdata3 0x04/dev/DSK/c16t0d3
/Dev/vgdata3/lv_data3/oradata3 0
-1 V/dev/vglock 0x01/dev/DSK/c16t0d0
* Checking versions of Ignite-UX filesets
* Creating system configuration.
*/Opt/ignite/bin/save_config-F
/Var/opt/ignite/recovery/2006-11-28, 14: 40/system_cfg vg00
* Backing up volume group/dev/vg00
*/Usr/sbin/vgcfgbackup/dev/vg00
Volume group configuration for/dev/vg00 has been saved in/etc/lvmconf/vg00.conf
* Creating map files for volume group/dev/vg00
*/Usr/sbin/vgexport-p-M/etc/lvmconf/vg00.mapfile/dev/vg00
Vgexport: volume group "/dev/vg00" is still active.

* Backing up volume group/dev/vgdata1
*/Usr/sbin/vgcfgbackup/dev/vgdata1
Volume group configuration for/dev/vgdata1 has been saved in/etc/lvmconf/vgdata1.conf
* Creating map files for volume group/dev/vgdata1
*/Usr/sbin/vgexport-p-M/etc/lvmconf/vgdata1.mapfile/dev/vgdata1
Vgexport: volume group "/dev/vgdata1" is still active.

* Backing up volume group/dev/vgdata2
*/Usr/sbin/vgcfgbackup/dev/vgdata2
Volume group configuration for/dev/vgdata2 has been saved in/etc/lvmconf/vgdata2.conf
* Creating map files for volume group/dev/vgdata2
*/Usr/sbin/vgexport-p-M/etc/lvmconf/vgdata2.mapfile/dev/vgdata2
Vgexport: volume group "/dev/vgdata2" is still active.

* Backing up volume group/dev/vgdata3
*/Usr/sbin/vgcfgbackup/dev/vgdata3
Volume group configuration for/dev/vgdata3 has been saved in/etc/lvmconf/vgdata3.conf
* Creating map files for volume group/dev/vgdata3
*/Usr/sbin/vgexport-p-M/etc/lvmconf/vgdata3.mapfile/dev/vgdata3
Vgexport: volume group "/dev/vgdata3" is still active.

* Creating control configuration.
* Creating archive file list
* Creating archive Configuration

*/Opt/ignite/bin/make_arch_config-C
/Var/opt/ignite/recovery/2006-11-28, 14: 40/archive_cfg-G
/Var/opt/ignite/recovery/2006-11-28,14: 40/flist-N 2006-11-28,14: 40-R
64-D recovery/archive-t-I 1-M t
* Saving the information about archive
/Var/opt/ignite/recovery/previews
* Creating the tape archive
* Checking configuration file for syntax
Adding/opt/ignite/version file to lif.
* Writing boot LIF to tape
85619 + 0 records in
85619 + 0 records out
* Complete writing boot LIF onto tape.
*/Opt/ignite/data/scripts/make_sys_image-C n-d/dev/RMT/0mn-t n-S
Local-N 2006-11-28, 14: 40-m t-W
/Var/opt/ignite/recovery/2006-11-28, 14: 40/recovery. Log-u-r-g
/Var/opt/ignite/recovery/2006-11-28, 14: 40/flist-A 13975320

* Preparing to create a system Archive

* Archiving contents of xine2 via tar image to local device/dev/RMT/0mn.
* Creation of system archive complete
Note: The following files are in the list of files that were on
System, but they are no longer present. These files are not
Encoded ded in the back-up:
/Var/tmp/ign_configure/make_sys_image.log

Note: cocould not read the/etc/resolv. conf file.

======= 11/28/06 15:41:27 eat make_tape_recovery completed successfully!

Specify a tape drive and change it back to its initial status
When an error occurs during the backup operation or the execution is interrupted due to a network disconnection, the conventional method is to re-execute the backup. Previously, the tape needs to be switched back to the initial state. When the file system device number is not specified in the backup operation, all files are "/dev/RMT/0 m ".

# MT-F/dev/RMT/0 m rew
Output result:
No output at this time. After the operation is completed, the prompt "#" appears "#".

Query the device number of a tape drive
If you do not know enough about the device information, you can use ioscan to query and obtain the device Number of the file system of the tape drive. At the same time, you need to have an impressive understanding of the physical connection of the device, because in some cases, the ioscan alone cannot be thoroughly analyzed.
By default, the hp9000 host tape devices are "/dev/RMT/0 m ".

# Ioscan-FNC tape
Output result:
Class I h/W path driver S/W State H/W type description
========================================================== ==========================================
Tape 2 0/2/1/0/4/0.97.25.20.1.3.1 stape claimed device HP
Ultrium 2-scsi
/Dev/RMT/2 m/dev/RMT/c10t3d1best
/Dev/RMT/2 MB/dev/RMT/c10t3d1bestb
/Dev/RMT/2mn/dev/RMT/c10t3d1bestn
/Dev/RMT/2mnb/dev/RMT/c10t3d1bestnb
Tape 4 0/2/1/0/4/0.97.25.20.1.3.2 stape claimed device HP
Ultrium 2-scsi
/Dev/RMT/4 m/dev/RMT/c10t3d2best
/Dev/RMT/4 MB/dev/RMT/c10t3d2bestb
/Dev/RMT/4mn/dev/RMT/c10t3d2bestn
/Dev/RMT/4mnb/dev/RMT/c10t3d2bestnb
Tape 1 0/3/1/0/4/0.97.26.20.1.3.0 stape claimed device HP
Ultrium 2-scsi
/Dev/RMT/1 m/dev/RMT/c11t3d0best
/Dev/RMT/1 MB/dev/RMT/c11t3d0bestb
/Dev/RMT/1mn/dev/RMT/c11t3d0bestn
/Dev/RMT/1mnb/dev/RMT/c11t3d0bestnb
Tape 3 0/3/1/0/4/0.97.26.20.1.3.1 stape claimed device HP
Ultrium 2-scsi
/Dev/RMT/3 m/dev/RMT/c11t3d1best
/Dev/RMT/3 MB/dev/RMT/c11t3d1bestb
/Dev/RMT/3mn/dev/RMT/c11t3d1bestn
/Dev/RMT/3mnb/dev/RMT/c11t3d1bestnb
Tape 0 0/4/1/0.4.0 stape claimed device HP c5683a
/Dev/RMT/0 m/dev/RMT/c4t4d0bestn
/Dev/RMT/0 MB/dev/RMT/c4t4d0bestnb
/Dev/RMT/0mn/dev/RMT/c4t4d0dds
/Dev/RMT/0mnb/dev/RMT/c4t4d0ddsb
/Dev/RMT/c4t4d0best/dev/RMT/c4t4d0ddsn
/Dev/RMT/c4t4d0bestb/dev/RMT/c4t4d0ddsnb