Four major injuries to notebooks

Notebook Four hurt you know how much! The specific four injuries are as follows:

One, temperature

If the temperature of the room is too high, the heat generated by the components will not be emitted, will make the performance of the circuit is poor, causing the machine to run unstable, serious can lead to damage to the hardware; too high temperature can also cause accelerated aging of computer components, before I have encountered the CPU because the fan is broken, not in time to burn the heat and burned the situation. If the room temperature is too low, too low room temperature will cause condensation and condensation phenomenon, which causes the device rust, temperature too low will make the insulation material hardening, brittle. Room temperature should be maintained at 15-35 degrees Celsius, the installation of air-conditioning to adjust the temperature is the best way to solve this problem. For individual users who do not have the conditions to install air-conditioning, if your machine is overclocking, you should lower the frequency in the hot season. Second, pay attention to the ventilation room, the equipment should not be too crowded between, to maintain a certain distance to the normal heat dissipation, and then as far as possible for the CPU to select qualified powerful fan.

Second, power supply

Provide a stable voltage and frequency, is to ensure that the computer and various peripherals stable operation of the basic requirements. The instantaneous voltage is too high to the IC chip is very dangerous, it is possible to penetrate the chip. The unstable power grid frequency will affect the normal operation of computer disk drives. Sudden computer power loss can result in in-memory programs and data lost, head damage and disk disc scratches. Computer power should use a dedicated line, do not work with other high-power electrical appliances. Equipped with uninterruptible power supply ups,ups with stable frequency stabilizing function, and has the ability to engage in interference, can be a sudden power outage to maintain a short period of power, so that users have time to save files, and then normal shutdown, which on the computer and a variety of equipment played a very good protective effect.

Third, vibration

The damage to the hard drive is needless to say, when the hard drive in high-speed rotation, a sudden vibration, the hard disk head and plate surface are very easy to be damaged or scratched, so that the data can not be read and write normally, resulting in loss, serious will also cause damage to the hard disk. Vibration will make the motherboard welding not strong components off welding, will make the motherboard and each card loose, contact is not good, causing a variety of failures. The way to prevent vibration is to buy a solid computer table and to put it in a stable place when the computer is disassembled and assembled. In the unit, for the future to transform the network cable layout and expansion of the room, the proposed use of removable flooring, so that can facilitate the wiring, reduce the computer and the fault occurred.

Four, Strong light

The display can accelerate the aging of the fluorescent powder and filament of the CRT and reduce the luminous brightness under the direct irradiation of the strong light. It also dims the display and prevents users from operating the computer. The way to prevent is to not put the display in the direct exposure to the sun, in the use of the process, in the user's permitted range as far as possible to reduce the brightness of the display. Set up screen saver to prevent the phosphor from long-term luminescence and premature aging. It is recommended to install curtains and other shading objects   in the interior;