Four methods to interpret wireless laptop connection

Many of my friends will connect wireless networks, especially those who use wireless networks on campus. We will introduce the wireless connection between the two laptops here. There are four methods available, which can be selected based on different situations. Which one is suitable for you?

Wireless connection between two laptops (1)

The dual-host wireless couplet, also known as the HOC method, has made great changes to the wireless settings, including the interface. Although it is not difficult to try, there are several points to master.

My environment is T42p, with IBMabg Nic, X31 secondary, with INTEL21003B Nic XP + SP2, Nic drivers are all up-to-date

1. Open your wireless network Connection Properties

2. Click "advanced" in the lower-right corner of the page and select "computer to computer only" at the bottom and "automatically connect to a non-preferred network" at the bottom"

3. Go back to the page in step 1. Click the Add button under the preferred network and enter the network name. In this example, "IBMNB01" removes the check mark "automatically providing key for me, change the data encryption option to "disabled". OK.

4. Enter the TCP/IP attribute of the wireless network card of the host, and enter the IP address and subnet mask. In this example, the IP address is 192.168.0.1 and the mask is 255.255.255.0.

5. Enter the TCP/IP attribute of the wireless network adapter on the secondary server, and select all IP addresses and DNS addresses as automatically obtained. OK.

6. Enter the Internet connection of the host. In this example, the network card is mb. select Advanced properties and click "allow other network users to connect through the INTERET connection of this computer"

7. In the next step, set the connection sharing items according to your choice.

8. After confirming the above settings, you can search for the Web bar, indicating that the couplet has been successfully searched.

Steps 1, 2, and 3 are the same operations on the master and slave machines, and must be set to the same on the two machines. Otherwise, the connection may fail.

4, 6, and 7 are dedicated to hosts, and 5 is dedicated to sub-hosts. After step 6 and Step 7 are completed, a prompt may be displayed, saying "the shared network cannot be implemented due to different IP addresses, ignore it. Just confirm it.

Step 2 shows a successful picture for both of them. As long as you ping each other's IP address, it means you can access the Internet, the Data Encryption Method in step 3 must be disabled. Otherwise, the data can be accessed normally.

Wireless connection between two laptops (2)

Dual-host wireless connection

1. enable wireless NICs for two laptops in BIOS or other management programs

2. set the wireless connection mode. Right-click the wireless network connection status icon on the right of the taskbar, select "view available wireless connections", and click "advanced" in the displayed dialog box ", go to the "Wireless Network Connection Properties" page, click "advanced" in the lower right corner of the "wireless network configuration" option, on the displayed page, change the "Network to be accessed" option, that is, change "any available network" to "computer-only ", follow "close" to complete this step. This step is required for both laptops.

3. select a laptop and click "add" under "preferred network" on the "wireless network configuration" page. The "Wireless Network Properties" dialog box is displayed) enter a flag in the "column, such as" 01 ", and click" OK "to exit. if you need to set one key, just enter the one you just set when connecting to another computer.

4. on another laptop, right-click the wireless network connection status icon on the right of the taskbar, in the displayed "connect to wireless network" dialog box, an available wireless network marked as "01" is displayed. Select it and click "Allow me to connect to the selected wireless network, even if it is insecure, you can press "√" in front of the "option, and then click" Connect ". If you point the pointer to the wireless network connection status icon on the taskbar, we can see the wireless connection between the two laptops, such as speed signal strength.

5. for ease of use, set the two laptops to the same working group to open the network neighbors, two laptops can see the icons of the two machines, including the other, and set the hard disks or folders for data exchange to be shared. Then, the two laptops can exchange information.

Wireless connection between two laptops (3)

Precautions for configuring two computers with a wireless Nic to a wireless peer network

1. Enable all wireless network cards

2. Under the "wireless network configuration" tab in the wireless network connection attribute, select "use Windows to configure my wireless network configuration" in "preferred network, add a network "service name (SSID)" that can be named at will, but the two computers must have the same SSID without special requirements. "network verification" can be configured as "open ", "Data Encryption" can be configured as "disabled"

3. Note that in advanced options, you must configure "only computers to computers". Otherwise, peer network cannot be formed.

Additionally, you need to enable Windows Wireless Services (by default, the system has enabled this service unless you disable it )!

This service is available in the control panel-management tools-service.

Wireless connection between two laptops (4)

I want to set up two laptops with wireless NICs, one of which is Dell's INSPARON2200 and the other HP CompaqPresarioB1904TU !!!!

1. Set the TCP/IP attribute of the wireless network adapter for the laptop. In the "General" tab of the "wireless network connection items" dialog box, set the IP addresses of the two hosts to the same network segment. For example: "192.168.1.X" (X represents a value ranging from 0 to 255), and The subnet mask is set to 255.255.255.0.

TCP/IP attribute of wireless network adapter

2. Right-click the wireless network connection status icon on the right of the taskbar, select "view available wireless connections", and click "advanced" in the displayed dialog box ", go to the "Wireless Network Connection Properties" page, click "advanced" in the lower right corner of the "wireless network configuration" option, on the displayed page, change the "Network to be accessed" option, that is, change "any available network" to "computer-only ", disable the "automatically connect to a non-preferred network" option, and click "close" to end this step, which is required for both laptops.

3. Select a laptop. On the "wireless network configuration" page, click "add" under "preferred network" to bring up "Wireless Network Properties ", enter a flag in the "Service Set flag (SSID)" column. You can define the entered flag. I will replace it with "XXX" and click "OK" to exit.